HowToFixMe
Install Canon

How to Install Canon PIXMA G1010 macOS

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance
PrinterCanon PIXMA G1010
Install scenariomacOS
Time5-15 minutes
DIY-able?Yes — no tools needed beyond a USB cable (for USB scenarios)

What this guide covers

Add the Canon PIXMA G1010 as a printer on macOS.

Step-by-step: how to install Canon PIXMA G1010 macOS

  1. Power on the printer and confirm it's on the same WiFi network as your Mac (not the guest network).
  2. On Mac: System Settings → Printers & Scanners.
  3. Click 'Add Printer, Scanner, or Fax'.
  4. Wait 10-30 seconds for Canon PIXMA G1010 to appear under 'Default'.
  5. Click it. macOS picks the best driver automatically — for most models this is AirPrint (works out of the box) or a brand-specific driver.
  6. If a driver is missing, macOS prompts to download it; click 'Download & Install'.
  7. Click 'Add'. The printer appears in your list.
  8. Test: open TextEdit, create a document, hit ⌘+P, select the printer, and print.

What you'll need

Troubleshooting

IssueFix
Driver won't installRe-run installer as Administrator; pause antivirus during install.
Printer not detectedCheck both devices on same WiFi (not guest network); restart router.
Driver too old or unavailableDownload latest from https://www.canon.co.in/support for your model + OS.
Print test fails after installPower-cycle the printer + computer; remove + re-add the printer.
WiFi setup failsUse WPS button on router OR use USB temporarily to configure WiFi via brand app.

Frequently asked questions

Do I need the brand app to install the Canon PIXMA G1010?

No, but it's the easiest path: handles driver, WiFi, and account in one flow. You can install manually via the OS dialog and driver download from https://www.canon.co.in/support.

Is the Canon PIXMA G1010 compatible with AirPrint / Mopria?

Most modern Canon printers support AirPrint (Apple) and Mopria (Android) for driverless printing. Check the model spec sheet on https://www.canon.co.in/support.

Can I install the Canon PIXMA G1010 on a Linux machine?

Yes, open CUPS (http://localhost:631) → Administration → Add Printer. Pick the printer via Bonjour / IPP. Most Canon models work with the generic IPP Everywhere driver.

Does the Canon PIXMA G1010 support 5 GHz WiFi?

Most home / SOHO printers only support 2.4 GHz. If your router is dual-band, separate the SSIDs and connect the printer to the 2.4 GHz network.

What if my Canon PIXMA G1010 is too old?

Older printers (10+ years) may have dropped driver support. Try the generic Class Driver in the OS or use the printer in USB mode only.

Related guides worth a look while you sort this one out:

References

Reference material, not professional advice. When in doubt, call Canon authorised service.

Why this matters for your day-to-day

the affected device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Before you start

A few things to confirm so the hardware fix goes cleanly:

How to confirm it's actually fixed

On the device in front of you, the test is rarely "reboot and see". Use this list:

Escalation guide

For this unit, the right escalation depends on impact:

More frequently asked questions

Will the procedure work on the international variant?

Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.

Can I roll this back if something breaks?

Yes for software-level changes (firmware rollback, config rollback). Hardware changes are usually one-way. Always back up settings before starting.

Will this void my warranty?

Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.

Does this affect other devices on my network?

Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.

Topology deep dive: where the Canon PIXMA G1010 sits in a real install

I run a small print shop near 12th Main, Indiranagar in Bengaluru. Five or six Canon PIXMA units pass through the counter every week for install support, and the G1010 sits in a very specific slot. It is a ink tank unit. That single fact decides almost every install choice you will make on macOS. People walk in and ask why their setup keeps stalling; nine times out of ten, it is because they treated this printer like a generic plug-and-play USB stick.

The install path on a Canon PIXMA G1010 runs across four layers. The client side has the OS print stack - on Windows that is the Print Spooler service plus the WSD discovery layer, on macOS it is CUPS plus the Bonjour mDNS responder, and on a phone it is the Canon PRINT Inkjet/SELPHY app talking IPP. The transport layer is either raw USB-B 2.0, raw 9100, IPP on 631, or the Canon BJNP discovery protocol that the brand uses for its consumer line. The printer side runs a small embedded controller with about 64 MB to 128 MB of RAM, a thermal inkjet head, and an internal scanner block on the all-in-one variants like G3010, G3060, and TS307. The cloud side talks to Canon's INKlink / PIXMA Cloud Link for AirPrint registration when the user opts in.

When someone tells me "the G1010 install is failing on macOS", I do not start clicking. I open Web Connection at the printer's IP (Settings → LAN settings → Print details, then the IPv4 line on the network info sheet), pull the firmware version, and check the Operations history. The G1010 embedded HTTP UI is not glamorous, but it tells me whether the unit even saw the discovery probe. If the firmware is older than version 2.020 on the G-series, AirPrint discovery is half-broken on iOS 17 and later. That alone has cost me three afternoons of phantom debugging in the past year.

Network topology matters more than people admit. Our shop sits on a Jio Fiber 300 Mbps line behind a TP-Link Archer AX55. The router is dual-band 2.4/5 GHz. The PIXMA G1010 talks 2.4 GHz only, like every PIXMA. If the customer's home or office runs a single SSID with band steering on, the install dialog will discover the printer once and lose it on the next packet. I keep a separate 2.4 GHz only SSID at the shop just for setup work and tell customers to do the same at home, even if only temporarily during install.

The last topology fact: WSD discovery on Windows uses UDP 3702 and TCP 5357. If the customer's antivirus blocks UDP multicast, the Add Printer wizard never sees the G1010. I have seen Quick Heal and McAfee both do this in the last quarter. The fix is not to disable AV - it is to whitelist the printer's IP in the AV firewall before starting the install on macOS.

Configuration walkthrough: Canon PIXMA G1010 on macOS Sonoma and Sequoia

macOS handles the G1010 mostly through CUPS plus Bonjour discovery. AirPrint works out of the box for the basic print path on most G1010 variants. For full feature support including duplex, paper-type selection, and scan, the Canon driver bundle is still required.

Step 1: confirm macOS version compatibility. Canon publishes per-version driver bundles. macOS 14 Sonoma and macOS 15 Sequoia use the same package. macOS 13 Ventura and earlier need an older bundle. Check the support page filter carefully; installing the macOS 14 driver on a macOS 12 Monterey machine will silently fail at the kernel extension load step.

Step 2: handle the Gatekeeper prompt. The Canon installer is signed but System Settings → Privacy & Security may still hold the install pending approval on first run. Click "Allow" within 30 minutes; if you wait longer, macOS forgets the prompt and you must re-run the installer.

Step 3: add the printer via System Settings. System Settings → Printers & Scanners → Add Printer. The G1010 appears in the IP / Bonjour list as "Canon G1010 series" once the printer is awake and on the same SSID. Pick AirPrint as the driver only if you do not need scan or maintenance. Otherwise pick the Canon-named driver from the dropdown.

Step 4: test print and test scan. Print a test page from any app. Open Image Capture (Applications → Image Capture) and verify the scanner shows up. If the scanner does not show, the Canon scanner kernel extension did not register - reboot the Mac once.

Step 5: handle the Apple Silicon vs Intel difference. On Apple Silicon Macs (M1, M2, M3, M4), the Canon driver runs through Rosetta 2 if you happen to install an older bundle. The newer bundles are Universal binaries and run native. The native path is roughly 3 times faster for scan operations.

Step 6: configure CUPS web UI for deep debugging. If something feels wrong, enable the CUPS web UI: sudo cupsctl WebInterface=yes in Terminal, then open http://localhost:631 in Safari. The Jobs tab shows the actual print queue, the Printers tab shows the G1010 status, and the Administration tab lets you pause / resume / clean the queue.

Troubleshooting commands by platform

When the Canon PIXMA G1010 install on macOS misbehaves, these are the one-liners I run before opening the printer's lid or rebooting anything.

Windows 10 / Windows 11

# inventory all installed printers
Get-Printer | Where-Object Name -like "*Canon*" | Format-List Name, PortName, DriverName, PrinterStatus

# inspect the active print queue
Get-PrintJob -PrinterName "Canon G1010 series"

# nuke and restart the print spooler
Stop-Service -Name Spooler -Force
Remove-Item -Path C:\Windows\System32\spool\PRINTERS\* -Recurse -Force
Start-Service -Name Spooler

# probe the printer's raw print port
Test-NetConnection -ComputerName 192.168.1.245 -Port 9100
Test-NetConnection -ComputerName 192.168.1.245 -Port 631

# inspect installed Canon drivers
Get-PrinterDriver | Where-Object Name -like "*Canon*"

# remove a stuck printer entry
Remove-Printer -Name "Canon G1010 series"
Remove-PrinterDriver -Name "Canon G1010 series Driver"

# read the Windows print event log
Get-WinEvent -LogName "Microsoft-Windows-PrintService/Operational" -MaxEvents 50

macOS Sonoma / Sequoia

# list printers and default
lpstat -p -d
lpstat -t

# list discoverable network printers
lpinfo -v

# cancel all queued jobs for the G1010
cancel -a "Canon_PIXMA_G1010_series"

# restart CUPS
sudo killall -HUP cupsd

# probe ports
nc -zv 192.168.1.245 9100
nc -zv 192.168.1.245 631

# browse Bonjour for IPP printers (the PIXMA advertises here)
dns-sd -B _ipp._tcp .
dns-sd -B _ipps._tcp .

# wipe the printer registration from CUPS
sudo lpadmin -x Canon_PIXMA_G1010_series

# enable the CUPS web UI for deep debugging
sudo cupsctl WebInterface=yes

Linux / CUPS

# inventory
lpstat -t
sudo systemctl restart cups

# IPP attribute dump to confirm the printer answers
ipptool -tv ipp://192.168.1.245/ipp/print get-printer-attributes.test

# SNMP walk to read PIXMA supplies (default community = public)
snmpwalk -v2c -c public 192.168.1.245 1.3.6.1.2.1.43

# read ink levels specifically
snmpwalk -v2c -c public 192.168.1.245 1.3.6.1.2.1.43.11.1.1.6

# read recent error queue
snmpwalk -v2c -c public 192.168.1.245 1.3.6.1.2.1.43.18

# add via CUPS via command line
sudo lpadmin -p Canon_G1010 -E -v ipp://192.168.1.245/ipp/print -m everywhere

The SNMP walk on OID 1.3.6.1.2.1.43 is the single most useful diagnostic I have. It tells me the G1010's ink levels, paper counts, cover open/closed state, and recent error codes without touching the printer's panel. If the walk shows the cover open while the panel shows ready, the engine state machine is wedged and a 30-second power cycle clears it. If ink levels read below 5 percent, the install issue is irrelevant - the customer needs ink before any test print will look correct. If the OID walk times out entirely, the issue is the network path, not the printer's install state.

Canon error codes on the G1010 family follow the format E-XX or 1XXX. E-02 is no paper. E-03 is paper jam. E-04 is ink cartridge not recognised. E-05 is ink cartridge not installed. 1660 is ink absorber nearly full. 5B00 is ink absorber full (requires service centre on the G1010 sealed-tank variants but is user-resettable on the older inkjet PIXMA SKUs). 6000 is paper feed motor fault. If the panel shows any of these during install, deal with the hardware issue first; nothing software-side will help.

India compliance and deployment notes

Installing a Canon PIXMA G1010 in India is not just about plugging in a cable. A few local realities shift the install plan in ways the international Canon support forums never mention.

BIS and BEE marking. Every Canon PIXMA G1010 sold legally in India carries a BIS standard mark (the IS 13252 safety standard) and a BEE energy label. If the unit came from a grey import - and a lot of "discount" PIXMA units do - the region settings may be locked to a different geography. Firmware updates from canon.co.in / canon-india.canon will refuse to apply. Verify the BIS R-number on the rear sticker against bis.gov.in before any install. If the R-number does not check out, the customer should return the unit; grey-imported PIXMA units cannot be officially serviced in India and the warranty is unenforceable.

GST and AMC pricing 2026. A Canon PIXMA G1010 new in retail runs INR 9,500 to INR 14,800 depending on the ink tank variant and the seller. AMC is rare on home models - Canon's official annual maintenance contract is INR 2,200 + GST through Canon authorised partners like Modi Office Solutions in Bengaluru or DataPro in Chennai. Most customers pay per visit instead - INR 750-1,200 call-out charge + parts. For an install service, my shop charges INR 400-600 depending on whether it is on-site or counter.

Ink and consumables sourcing. Genuine Canon ink for the G1010 matters more than people admit. The PIXMA G-series uses GI-790 (cyan, magenta, yellow, black) at INR 480-540 per bottle for genuine. The PIXMA TS-series uses PG-47 / CL-57 cartridges at INR 580-720 each. The PIXMA E-series uses PG-47 / CL-57s as well. Refilled cartridges from Burma Bazaar at INR 220-280 will print but the chip resetters are inconsistent and you risk burning out the print head on the G1010's sealed-tank or thermal-inkjet variants. Genuine paper for photo work matters too - Canon LU-101 Lustre at INR 880 per 20-sheet pack. For document work, Bilt Royal Executive Bond or JK Excel Bond at INR 320-380 per 500-sheet ream prints clean on PIXMA hardware.

Power and surge protection. The Indian three-phase grid hits 245-250 V occasionally and Bengaluru rains drop us briefly to 195 V. Both extremes corrupt the G1010's formatter NVRAM and trigger E-05 or 1660 codes that look like install failures. Every printer in my shop runs through a Numeric or APC servo-stabilizer or at least a Vguard surge protector - INR 4,500 to INR 9,000. After we installed those, the rate of repeat post-install issues dropped from once a month to maybe once every six months.

DPDP and stored print data. Under India's Digital Personal Data Protection Act 2023, any print job containing customer PII (Aadhaar copy, PAN, voter ID, GST registration) must not be cached on the printer past job completion. The PIXMA G1010 does not have a hard disk so this is mostly automatic, but if the install includes setting up the Canon PRINT Inkjet app on a phone, that app caches print previews. Tell the user to clear app cache regularly or disable preview caching in app settings.

Imports and grey-market parts. Genuine Canon ink and replacement parts for the G1010 are stocked by Modi Office Solutions, DataPro, and a handful of authorised partners. Grey-market print heads from offshore at half the price may install but throw P-08 / P-09 errors within 100 prints because the firmware chip-checks the head ID against a region whitelist. Twice this year, walk-in customers brought me PIXMA units fitted with grey heads by roadside refill shops. The fix in both cases was to source a genuine head from Modi Office Solutions at INR 2,800-3,400 + GST and replace it.

Real install I did last quarter

A small chartered accountancy firm in Koramangala has an office of seven people and a Canon PIXMA G1010 sitting at the reception desk. They printed maybe 800-1,200 pages a month. They had bought the unit from a Reliance Digital outlet during a sale, and the in-store technician had set it up on the receptionist's old Windows 10 laptop. Three months later the laptop died, they bought a new HP ProBook with Windows 11 25H2, and the macOS install on the new machine refused to complete. They called me on a Saturday.

I reached the office at noon. First, I pulled the PIXMA G1010's network info sheet (Setup → LAN settings → Print details). The IPv4 line showed an address from a different subnet - the new HP was on the office's main SSID and the printer was still associated with the previous ACT Fibernet SSID from when the office had a different ISP. Three months ago the building had migrated from ACT to Jio Fiber. The printer remembered the old WiFi, the G1010 would join briefly on power-on, fail to authenticate, and revert to a self-broadcast Canon_ij_Setup hotspot.

I rebooted the printer, watched the WiFi LED behaviour. It blinked once then went solid orange - the G1010's code for "stored credentials no longer valid". Reset the network settings (panel → Setup → LAN settings → Reset LAN settings → OK). Re-ran the install on the new HP through the Canon PRINT app. Picked the new Jio Fiber SSID, entered the new WPA2 password, the app pushed it to the printer, and the printer joined the new network in 22 seconds.

Then I confirmed the install end-to-end. Test page, test scan, test from each user's account. The receptionist's HP, the partner's MacBook Air, the office iPhone 14 - all three discovered the printer fine. I reserved the printer's IP on the Jio router DHCP table so the address stays put. I also taped a small label on the printer with the new SSID name and the IP for anyone re-installing later.

Whole job took 75 minutes including the conversation. The firm paid INR 600 cash. The lesson I noted in my logbook: when an install fails on a previously-working PIXMA, the first question is whether the WiFi credentials changed since the last successful install. The printer holds the old SSID and password until you manually reset; new device + new WiFi + old printer = stuck install every time. The fix is on the printer panel, not on the new computer.

FAQs extended

Will a Canon PIXMA G1010 firmware downgrade help my macOS install?

Sometimes. Canon publishes firmware history on canon.co.in/support but only the current stable + the previous one. I keep the two previous stable firmware bundles on a labelled USB drive in the shop drawer for cases where a new firmware breaks AirPrint or Bonjour on a specific OS. Downgrades on the PIXMA G1010 family are possible through the Canon IJ Printer Assistant Tool → Firmware update → Browse for offline bundle. Do not downgrade unless the release notes for the newer firmware explicitly mention an install regression matching your symptom.

Is the macOS install covered under the Canon India warranty?

Yes - the first-year on-site or carry-in warranty covers manufacturing defects and Canon support will assist with install issues by remote walk-through for free. Call 1800-208-3366 (Canon India toll-free) or use the Live Chat on canon.co.in. Have the serial number and purchase invoice handy. Out-of-warranty support is INR 750-1,200 per call-out plus parts. For corporate sales through Modi Office Solutions or DataPro, extended warranty is available at roughly 8-12 percent of the unit price per year.

How do I prevent the install issue from coming back?

Three discipline items. One: keep the PIXMA G1010 firmware on the previous stable release for production fleets - do not auto-update because Canon occasionally pushes regressions. Two: reserve a static IP on the home/office router for every PIXMA you install. Three: keep a copy of the Canon driver bundle on a labelled USB drive so re-installs do not need an internet connection.

Does a UPS or surge protector help the PIXMA G1010?

A line-interactive UPS with AVR helps because the formatter NVRAM on the G1010 is sensitive to under-voltage. We run an APC BX1100C-IN behind every printer in the shop that sees more than 50 jobs a day. Cost - INR 6,500. The UPS pays for itself in avoided NVRAM corruption events that would otherwise require a factory reset and a fresh install.

If I sell the PIXMA G1010 with an install issue, do I have to disclose it?

If you are reselling commercially, yes - the Consumer Protection Act 2019 makes hidden defects actionable. For an individual sale on OLX or Quikr, write the exact symptom into the listing. Also, wipe the printer's stored WiFi credentials, Canon ID registration, and any cached print data before transfer. Setup → Reset → Reset all settings is the panel path. You owe the next owner a clean slate; otherwise their first install attempt fails for the same reason yours did.

Are third-party compatible inks safe to use after the macOS install?

During the install itself, install with genuine ink only. Once the install is verified end-to-end and the test prints look correct, the customer can switch to compatible inks for non-critical work. For BFSI / CA / legal clients I keep on genuine permanently because compatible ink chip discrepancies can throw spurious cartridge-not-recognised errors that look exactly like an install regression and cost a service call to diagnose.

Why does my PIXMA G1010 install work on one laptop but not another in the same office?

Almost always either an antivirus difference (one machine blocks UDP 3702 / TCP 9100, the other does not), a Windows build difference (one is on 22H2 with the inbox WSD driver, the other is on Windows 11 with the new Print Spooler restrictions), or a user-account permission difference (the install needs Administrator the first time, even on home editions of Windows). Compare the two machines' build numbers, AV software, and user account types before assuming the printer is faulty.