How to setup fax forwarding to email Brother on Epson

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

Why I wrote this one

I run a small print-shop service on the side - mostly weekends, sometimes after-hours when an SMB calls in panicking. Last month at a media production prep room in Powai, Mumbai, a customer had bought a Epson unit on Croma the same day and could not get past the basics. They wanted exactly this: Forward inbound fax pages to an email address on a Brother MFC. The shop walked them through a generic setup, the unit threw a F244 hint banner on the panel, and the customer ended up at my desk with the box still in plastic.

This guide is the same runbook I used that evening. It is the Fax-to-Email / Fax Forwarding flow specifically on a Epson machine, but I have added the cross-checks you need when the unit is part of a heterogeneous fleet - because in real Indian SMB offices, you rarely have one brand of printer. There is a Brother MFC in admin, a HP DeskJet in accounts, a Canon PIXMA in design, and someone's personal Epson EcoTank on a side desk. Getting one task right per brand sounds simple until you realise each brand hides the menu in a different place.

One brand quirk to put on your radar right away: Epson EcoTank Wi-Fi Direct SSID is 'DIRECT-XX-EPSON-XXXX' with a default password printed on the network-status sheet; if the sheet is lost, hold the Wi-Fi button 10 seconds to reset Wi-Fi Direct credentials. I learned that one the hard way and the customer was patient enough to let me re-do the setup the next morning. Saves time if you know it going in. The tool I keep on the laptop bag for work like this is Brother iPrint&Scan 4.2 - free, reliable, and it covers 80% of the customer requests I see.

What you need on the desk before you start

Print-shop work is mostly preparation. Once you start, you do not want to be running back to the laptop for a missing tool or hunting for the toner cartridge box for the model number. Get all this within arm's reach before you start.

• The Epson unit physically accessible - the front panel reachable, the rear ports visible, and the power button within arm's reach. If you are dealing with a Epson MFP in a built-in cabinet, slide it out first.
• Network credentials: Wi-Fi SSID and password if it is wireless, DHCP-reserved IP or static IP if it is wired. For SMB sites with Cisco infrastructure, confirm the printer VLAN tag with the network admin before plugging in.
• An admin laptop on the same subnet. I keep a refurbished Lenovo ThinkPad T480 (INR 22,000 / USD 262 used) just for print-shop calls. Web UIs do not render well on phones.
• The unit's model number and serial. Epson firmware revisions differ by even a single sub-model. Knowing the exact SKU saves you 20 minutes of menu-spelunking.
• The toner / ink box. Some firmware-level operations ask for the cartridge ID; quicker to grab it now than dig in the bin later.

Tools I usually have open

• Epson iPrint 7.13
• Wireshark 4.2 (for IPP/SMB capture)
• Xerox Easy Printer Manager 1.5
• Ricoh Device Manager NX Lite 1.7

Even if you only end up using two of these, the others are useful when something goes wrong. Wireshark in particular is the one I reach for when the unit advertises a service but a client cannot find it - and yes, that happens with Wi-Fi Direct on channel-1-congested 2.4 GHz floors more often than you would think.

The actual procedure - step by step

This is the path I used in the an architecture studio in Koramangala 4th block job last month. It is written for a Epson unit with current 2025-2026 firmware. Older revisions may shuffle the menu structure; the labels are stable across firmware generations but the menu depth changes.

1. Power the unit on and let it finish its boot self-test. On a Epson cold-boot, this takes 90-150 seconds. Do not interrupt - on Brother MFCs I have seen interrupted boots leave the unit asking for cartridge re-seat on next power-up. Wait for the home screen.
2. Confirm network connectivity. Print a network-config page. On Brother, hold the Wi-Fi button for 3 seconds then tap 'Print'. On Canon PIXMA, hold Resume for 2 seconds. On HP, Menu -> Reports -> Network Configuration. On Lexmark, Menu -> Reports -> Network Setup Page. The IP address is what you need.
3. From the admin laptop, open the printer's web UI at https://<printer-ip>. If the cert is self-signed, accept the warning. Sign in as admin. Default credentials are: Brother (admin / initpass), HP (admin / blank on first boot), Canon (ADMIN / canon), Lexmark (admin / admin), Kyocera (Admin / Admin), Ricoh (admin / blank), Xerox (admin / 1111). Change the default immediately - I have seen GeM compliance auditors flag default-password MFPs as a sev-2 finding.
4. Navigate to Web Based Management -> Fax -> Remote Fax Options -> Forward + SMTP. On the Epson web UI this is the canonical path. If your firmware revision shows a slightly different label, search for the keyword in the menu (most Epson EWS revisions have a search box at the top).
5. Fill in the operation-specific fields. For Fax-to-Email / Fax Forwarding, the required fields are listed in the section below.
6. Save and apply. Epson firmware behaviour: HP and Canon auto-apply on Save; Brother, Lexmark, Kyocera require an explicit 'Submit' or 'Apply' click after Save; Xerox and Ricoh require you to acknowledge a warning prompt that says configuration will reload. The reload takes 30-90 seconds, during which the device is offline.
7. Test from a real client. Do not trust the web UI confirmation. Run the operation end-to-end from a normal user laptop on the same network you will use in production. If the test fails but the web UI says success, the issue is almost always firewall / network ACL on the client side.
8. Document and log. Snap a photo of the final config, save it to a folder labelled with the customer name, the Epson serial, and date. Customers call back six months later with 'it stopped working' and your photo is the baseline to compare against.

Two Epson quirks worth calling out before you push the config live: Epson EcoTank L-series factory reset wipes Wi-Fi credentials and clears the print head alignment - the head re-align eats 4-6 mL of ink, budget for it Also worth knowing: Epson L3252 lacks a duplex unit; L6290 has one - 90% of customer-side 'why can't I print 2-sided' calls trace back to the cheaper SKU being mis-sold.

The fields you actually need to fill in

Fax forwarding to email on a Brother MFC is just an SMTP relay plus a destination address book entry plus an inbound-fax routing rule. The hard part is the SMTP relay - the customer's network probably blocks port 25 outbound, and most consumer Brother units have a small TLS cipher list.

• SMTP server: smtp.gmail.com:587 for Gmail/Workspace, smtp.office365.com:587 for M365, smtp.zoho.in:587 for Zoho Mail (India). Port 587 with STARTTLS.
• SMTP authentication: username = full email address. Password = app-specific password (Google and Microsoft both require this when 2FA is on, which is most of the time).
• From address: must match the authenticated user, otherwise M365 returns 550 5.7.60.
• Forward destination: the email address that receives the inbound fax. PDF attachment is the default; TIFF is the legacy option some legal departments still ask for.
• Print copy: tick 'Print Backup Copy' if the receiver wants both a paper printout and the email. Saves a re-print call later.
• Memory storage: enable 'Memory Receive' so an inbound fax lands in the unit's memory if the printer is out of paper or toner. The unit still forwards to email regardless.

Brother unit RAM for fax memory is around 16-24 MB on consumer SKUs - good for 60-100 pages of received fax before it stops accepting new inbound. For high-volume offices, switch to an inbound number that lands at a service like Sparrow Fax or Fax to Email India (INR 199-499/month / USD 2-6) and skip the physical fax entirely.

Verifying it works - real commands

# Test SMTP connectivity from a laptop on the same subnet:
Test-NetConnection -ComputerName smtp.gmail.com -Port 587

# Test SMTP STARTTLS handshake against Gmail relay:
openssl s_client -starttls smtp -connect smtp.gmail.com:587 -crlf

# Send a test fax from a known external number to the Brother unit:
# Confirm the fax is received AND the forwarded email lands in the destination inbox.

# Capture the printer's SMTP traffic with Wireshark to confirm STARTTLS:
# filter: ip.src == <printer-ip> and tcp.port == 587

# Verify the email landed (Gmail web UI):
# Search: from:<printer-from-address> has:attachment newer_than:1h

When it fails - the real root causes

When the procedure does not work, the cause is almost always one of these five. I rank them in the order I check on a real service call.

1. Firmware out of date. Epson pushes minor revisions every 4-8 weeks. Anything older than 6 months has a non-trivial chance of menu paths having shifted or a known bug applying. Update first, retry second.
2. Network reach failure. mDNS blocked, VLAN mismatch, SMB share unreachable, SMTP port blocked. Run a ping and a port-test from the admin laptop before blaming the printer.
3. Credential mismatch. The admin password the customer thinks is set is not what is actually set. Try the default, then the customer's usual pattern, then ask for a reset.
4. Hardware-feature mismatch. The model SKU does not include the feature the customer thinks they bought. Worth verifying against the spec sheet before spending an hour debugging an option that does not physically exist.
5. Genuine hardware fault. The unit throws a panel code like B200 that maps to a real service condition. At that point, factory reset will not fix it; the unit needs service or RMA.

Out of every 10 service calls, my rough split is 4-3-1-1-1 in that order. Most problems are firmware or network. Hardware faults are the rarest cause, even though customers blame hardware first.

Realistic cost picture (Indian SMB, 2026)

Customers ask for prices in the same call as the configuration help. These are typical 2026 channel quotes I see in Bengaluru and Chennai.

Channel-wise, I usually source from ESS Bengaluru (Koramangala office - SMB / education vertical) for warranty-sensitive deployments, and from Amazon Business / Flipkart Wholesale for sub-INR 30,000 SKUs where GST invoicing is the priority. GeM (Government e-Marketplace) consumer MFP buys must specify exact toner duty cycle in the BoQ - missing it sinks the L1 evaluation.

Important rule on consumables: a 30% saving on a non-OEM toner can cost you INR 18,000 (USD 215) when the drum fails six months later because the cheap toner left residue. I never recommend non-OEM consumables for production MFPs. For occasional-use home printers, the calculus is different.

One field story I still think about

About eight months ago I got a call from a school admin block in T Nagar, Chennai. They had a Epson unit on the floor and it had started behaving badly. The owner had already reset it twice. He was about to call the service centre, which on a Saturday in Bengaluru means a Monday visit at best.

I drove over with the toolkit. Pulled out Wireshark 4.2 (for IPP/SMB capture) and started capturing traffic from the printer to the laptop. The unit was throwing 0xc4eb827f in its internal log buffer. The fax was forwarding successfully, but the email was landing in the receiver's spam folder because the From address did not match the authenticated user - M365 was flagging it as spoofed. Setting From = sender@customerdomain.com (matching the SMTP auth account) fixed it on the next inbound.

What I took away from that call: in 2026, every SMB MFP needs at minimum current firmware + correct time/date + sane network defaults. Most silent communication errors I see are configuration mismatches at the edge - not hardware faults. The firmware default on units sold in 2022-2023 still has many insecure defaults; you have to bump them up after install. I now include this step in every onboarding checklist.

Total time on site: 65 minutes. Customer paid INR 1,000 (USD 12). The unit has been stable since.

FAQs I get from actual customers

Will this work on the international variant of my Epson unit?

Mostly. The web UI and the menu paths are stable across regions; what differs is the cartridge region-lock and a few feature toggles (some markets get features others do not). For configuration like time/date sync, Wi-Fi onboarding and PIN print, the path is identical. The language pack may display the option in your local language.

How often should I run preventive checks?

For SMB units printing under 1,000 pages a month, every 3-4 months is fine. For production print shops doing 10,000+ pages, monthly: check the maintenance counter, the fuser life percentage on lasers, the ink-pad fullness on inkjets, and the firmware revision.

Will this void my warranty?

Standard configuration through the official web UI or panel menus does not void warranty. Setting the time/date does not void warranty. Updating firmware through the official Epson portal does not void warranty. What voids warranty: opening the chassis, using non-OEM toner that damages the unit, modifying the firmware with non-official tools. Stay within the official channels and you are safe.

What if my model is a slightly different revision?

Cross-check the model code on the rating plate at the back of the unit. Major firmware generations sometimes shift menus by one or two levels. Search for the keyword inside the EWS - most modern Epson web UIs have a search box that finds menu options.

Can I roll back if something goes wrong?

Configuration rollback: yes. Most Epson EWS let you export the current config to a .bin or .json file before changing anything; you can re-import it to roll back. Firmware rollback: no on most units - newer firmware writes version-locked bootloader entries that refuse older binaries. Take the config export before you make changes.

Is the customer's data safe during this procedure?

For configuration changes - yes, no user data is touched. For Wi-Fi password changes - the printer disconnects briefly while rejoining; held print jobs in RAM will be lost if the unit reboots. For fax forwarding setup - the SMTP password is stored encrypted in the unit's NVRAM; treat it as you would any other credential.

Should I update firmware before or after this procedure?

Before. Always before. Firmware updates can shift menu paths and can include fixes that make the procedure go smoother. The exception: if the customer is mid-deadline and a firmware update is non-trivial (30-45 minutes including reboot), defer to after.

Keeping the unit healthy so this is the last time

After the immediate fix, these habits keep the Epson unit healthy.

• Schedule a quarterly health check. Print a configuration page, save it to the customer's folder, diff against the previous quarter. Drift shows up early this way.
• Subscribe to the Epson firmware update notifications. Most brands have an opt-in email list; sign the customer's admin address up.
• Cap the print job retention to 24 hours. Long retention fills disk on devices with internal storage, leading to silent paper-jam-look-alike errors that confuse customers.
• Document the admin password in a password manager - Bitwarden Premium is INR 850/year (USD 10) per user. Customers lose printer admin passwords more often than any other credential.
• Photograph the rating plate at first contact. Model number, serial, manufacture date - all of which you will need for warranty claims and replacement part orders.
• Build an inventory spreadsheet: unit, location, IP, MAC, firmware revision, last-serviced date. Saves hours when a customer calls in a panic.
• Educate the end user on what 'paper out', 'toner low', and 'replace drum' actually mean - many service calls are user error.

None of this is glamorous. All of it pays back in fewer Saturday-evening emergency calls.

Closing the loop

The Fax-to-Email / Fax Forwarding flow on a Epson unit is not complicated once you know the menu path and the gotchas. The first time takes 30-45 minutes because you are looking around the EWS for the right menu. By the third time it is under 10 minutes including the verification test.

If the procedure does not work after one careful pass, do not keep retrying in panic mode. Take a screenshot, take a panel photo, save the network-config page, and step back. Most failures are network or firmware related, and both are diagnosable from the artefacts you just captured. Repeating the same wrong steps faster does not fix anything.

I keep a small printed cheat-sheet in the toolkit with the default credentials for every major brand and the panel-reset shortcut for each. It lives next to the toner-vacuum and the spare network cable. Boring, but it has saved me twenty minutes of fumbling more times than I can count.

Related fixes

Related guides worth a look while you sort this one out:

• How to setup fax forwarding to email Brother on Brother
• How to setup fax forwarding to email Brother on Canon
• How to setup fax forwarding to email Brother on HP
• How to setup fax forwarding to email Brother on Kyocera
• How to setup fax forwarding to email Brother on Lexmark
• How to setup fax forwarding to email Brother on Pantum