HP DeskJet 2700 vs Canon PIXMA TS3522: Decision Guide

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

Why I wrote this one

I run a small print-shop service on the side. Most weekends, sometimes after-hours when a small business calls in panicking. Last month at a yoga centre's billing desk in Indiranagar, a customer had bought a HP unit at Croma the same day and could not get past the basics. They wanted exactly this: Pick between HP DeskJet 2700 and Canon PIXMA TS3522 for home use. The shop walked them through a generic setup, the unit threw a C7990 hint on the panel, and the customer landed at my desk that evening with the box still in plastic.

This guide is the same runbook I used that night. The Buying Comparison (DeskJet 2700 vs PIXMA TS3522) flow specifically against a HP machine, but with the cross-brand cross-checks you actually need when the unit lives in a heterogeneous fleet. In real Indian SMB offices, you rarely see one brand of printer. There is a Brother MFC in admin, an HP DeskJet in accounts, a Canon PIXMA in design, and someone's personal Epson EcoTank on a side desk. Getting one task right per brand sounds simple until you realise every brand hides the menu in a different place.

One brand quirk to put on your radar right away: HP cartridge protection (HP+ subscription locking) is region-coded; an Indian-region cartridge will throw '83.0' supply error on a US-region M283 even though the part number matches. I learned that one the hard way. Saves an evening if you know it going in. The tool I keep on the laptop bag for work like this is Kyocera Net Viewer 5.5. Free, reliable, and it covers 80 percent of customer requests I see.

What you need on the desk before you start

Print-shop work is mostly preparation. Once you start, you do not want to be running back to the laptop for a missing utility or hunting under a chair for the cartridge box and its part number. Get all this within arm's reach before you begin.

• The HP unit physically accessible. The front panel reachable, the rear ports visible, the power button within arm's reach. If the unit sits inside a built-in cabinet, slide it out first.
• Network credentials: Wi-Fi SSID and password if wireless, DHCP-reserved or static IP if wired. For SMB sites running Cisco infrastructure, confirm the printer VLAN tag with the network admin before plugging in. AirPrint and Wi-Fi Direct in particular care a lot about the broadcast domain.
• An admin laptop on the same subnet. I keep a refurbished Lenovo ThinkPad T480 (INR 22,000 / USD 262 used from Vijay Sales OLX listings) for print-shop calls. Web UIs do not render well on phones.
• The unit's model number and serial. HP firmware revisions differ by even a single sub-model. Knowing the exact SKU saves you 20 minutes of menu spelunking.
• The toner / ink box and a spare cartridge if you have one. Some firmware-level operations ask for the cartridge ID; quicker to grab it now than dig in the bin later.
• An iPhone or iPad on the same SSID if the task involves AirPrint. Discovery requires Bonjour from a real Apple client.

Tools I usually have open

• Xerox Easy Printer Manager 1.5
• WLAN Pi for Wi-Fi direct signal sanity-check
• EpsonNet Config 4.9.6 (for static IP push)
• SecureCRT 9.4 (when the MFP exposes serial console)

Even if I only end up using two of these, the others are useful when something goes wrong. Wireshark in particular is the one I reach for when the unit advertises a service but a client cannot find it - and that happens with AirPrint and Wi-Fi Direct on switched home networks more often than you would think.

The actual procedure step by step

This is the path I used in the an ESS Bengaluru reseller demo bay (off Hosur Road) job last month. Written for a HP unit on current 2025-2026 firmware. Older revisions may shuffle menu structure; labels stay stable across firmware generations but menu depth changes.

1. Power the unit on and let it finish its boot self-test. A HP cold boot takes 90-150 seconds. Do not interrupt - on HP DeskJet 2xxx units I have seen interrupted boots leave the printer asking for cartridge re-seat on next power-on. Wait for the home screen.
2. Confirm network connectivity. Print a network-configuration page. On HP DeskJet 2xxx / 3xxx, press Wi-Fi + Info simultaneously (2 seconds). On Canon PIXMA, hold Resume for 2 seconds. On Brother MFC, Menu -> Network -> Print Network Config. On Epson EcoTank, Setup -> Network Settings -> Print Status Sheet. Read off the IP address.
3. From the admin laptop, open the printer's management surface. For HP DeskJet 2xxx / 3xxx / 4xxx, that is the HP Smart app, not an EWS - those models do NOT expose a full web UI for end users. For HP EcoTank, M283fdw, and most other categories you reach the EWS at https://<printer-ip>. Accept the self-signed cert warning. Sign in as admin: Brother (admin / initpass), HP (admin / blank on first boot), Canon (ADMIN / canon), Lexmark (admin / admin), Kyocera (Admin / Admin), Ricoh (admin / blank), Xerox (admin / 1111).
4. Navigate to Compare CPP, Instant Ink eligibility, mobile-app quality, warranty in India. On a HP unit this is the canonical path. If your firmware revision shows a slightly different label, search for the keyword in the menu - most HP surfaces have a search box at the top.
5. Fill in the operation-specific fields. For Buying Comparison (DeskJet 2700 vs PIXMA TS3522), the required fields are listed in the section below.
6. Save and apply. HP firmware behaviour: HP and Canon auto-apply on Save; Brother, Lexmark, Kyocera need an explicit Submit or Apply click after Save; Xerox and Ricoh require an acknowledgement prompt before the configuration reload. The reload takes 30-90 seconds. The device is offline during the reload.
7. Test from a real client. Do not trust the web UI confirmation. Run the operation end-to-end from a normal user laptop or phone on the same network you will use in production. If the test fails but the surface says success, the issue is almost always firewall / network ACL on the client side or Bonjour broadcast scope.
8. Document and log. Snap a photo of the final config, save it to a folder labelled with customer name, HP serial, and date. Customers call back six months later with "it stopped working" and your photo is the baseline to compare against.

Two HP quirks worth calling out before you push the config live: HP DeskJet 2700/2755e series uses dynamic security: a non-HP cartridge or a refilled OEM cart will throw 'Cartridge Problem' after the next firmware OTA update silently Also worth knowing: HP EcoTank ET-2800/2850 ink-not-entering-tank issues usually trace to a missed venting-cap removal step; the bottle has a small green vent plug that customers leave in.

DeskJet 2700 vs PIXMA TS3522 - the honest side-by-side

I get this question once a week from home users picking their first printer. Both units retail under INR 9,000 (USD 107) on Amazon India. They look almost identical on paper. The real differences only show up after the first six months of use.

My recommendation: if the user prints 50+ pages a month, the HP DeskJet 2700 with HP Instant Ink (INR 199/month for 50 pages) is the lowest cost-per-page option in India. If the user prints under 20 pages a month or values the freedom to refill cartridges locally (a real factor in Tier-2 cities), the PIXMA TS3522 is the safer pick.

Calculating real cost-per-page - the formula

# For HP DeskJet 2700 with HP 67XL (240 pages, INR 1,799):
# Standard CPP = 1799 / 240 = INR 7.50 per page

# For HP DeskJet 2700 with HP Instant Ink 50-page plan (INR 199/month):
# Instant Ink CPP = 199 / 50 = INR 3.98 per page (any colour, any time)

# For Canon PIXMA TS3522 with PG-47 black (180 pages, INR 1,099):
# Canon CPP = 1099 / 180 = INR 6.10 per page

# For Canon PIXMA TS3522 with refilled cartridge (INR 200 refill in Chickpet):
# Refill CPP = 200 / 180 = INR 1.11 per page (warranty void)

# Honest recommendation based on usage:
# 0-15 pages/month: Canon TS3522 with occasional refill (lowest absolute cost)
# 15-50 pages/month: HP DeskJet 2700 + Instant Ink 50-page plan
# 50-100 pages/month: HP DeskJet 2700 + Instant Ink 100-page plan

When it fails - the real root causes

When the procedure does not work, the cause is almost always one of these five. I rank them in the order I check on a real service call, based on what I see in Bengaluru SOHO and small-shop environments.

1. Firmware out of date. HP pushes minor revisions every 4-8 weeks. Anything older than 6 months has a non-trivial chance of menu paths having shifted or a known bug applying. Update first, retry second.
2. Network reach failure. mDNS blocked, VLAN mismatch, corporate proxy blocking the printer-cloud endpoint, ISP-side filtering. Run a ping and a port test from the admin laptop before blaming the printer.
3. Credential or pairing mismatch. The OAuth token expired, the admin password the customer thinks is set is not actually set, or the customer signed up on a different account. Try the default, then the customer's usual pattern, then ask for a reset.
4. Hardware-feature mismatch. The model SKU does not include the feature the customer thinks they bought. Worth verifying against the spec sheet before spending an hour debugging an option that does not physically exist. DeskJet 2xxx series in particular has feature trims by sub-model.
5. Genuine hardware fault. The unit throws a panel code like 0F7 that maps to a real service condition. At that point, firmware reset will not fix it; the unit needs service or RMA.

Out of every 10 service calls, my rough split is 4-3-1-1-1 in that order. Most problems are firmware or network. Hardware faults are the rarest cause, even though customers blame hardware first.

Realistic cost picture (Indian SOHO, 2026)

Customers ask for prices in the same call as the configuration help. These are typical 2026 channel quotes I see in Bengaluru, Chennai, and Mumbai.

Channel-wise, I usually source from Redington India (Chennai HQ - distributor for HP DeskJet, LaserJet Pro) for warranty-sensitive deployments, and from Amazon Business / Flipkart Wholesale for sub-INR 30,000 SKUs where GST invoicing is the priority. GeM AMC for an SMB MFP runs INR 2,800-4,500 per year (USD 33-54) including two preventive visits and labour; ink is consumable, billed separately.

Important rule on consumables: a 30 percent saving on a non-OEM cartridge can cost you INR 1,500 (USD 18) on the next printhead failure - and on the HP DeskJet 2xxx/3xxx series the printhead is built into the cartridge, so a damaged printhead means a whole new cartridge anyway. I never recommend non-OEM consumables for production SOHO units. For occasional-use home printers the calculus is different, and Chickpet refill shops (INR 200 per cartridge) are a valid option if warranty no longer matters.

One field story I still think about

About eight months ago I got a call from an ESS Bengaluru reseller demo bay (off Hosur Road). They had a HP unit on the front desk and it had started behaving erratically - some print jobs came out fine, others showed a generic error and the customer was about to return the unit to Croma. The owner had already reset it twice and called HP Toll-free support without resolution. It was a Saturday in Bengaluru, which on most service-centre calendars means a Monday visit at best.

I drove over with the toolkit. Pulled out HP Print and Scan Doctor 5.7 (Windows only) and started capturing traffic between the printer and the laptop. The print job was actually reaching the printer - the printer was acknowledging it on the wire - but internally the firmware was throwing E-02 in its diagnostic log about 12 seconds after job acceptance. Strange.

The fix took twenty more minutes to find. The unit had been on factory firmware (shipped April 2024, never updated). HP had pushed a security OTA in December 2024 that changed how the unit handles PDF print jobs over 5 MB. The customer's normal print job was a 7 MB PDF and the old firmware was choking. The fix was: update firmware through HP Smart, takes 4 minutes, then reprint. Worked first try.

What I took away from that call: in 2026, every consumer printer needs an OS-level update check the day it leaves the box. Out-of-box firmware is often 12-18 months old by the time the customer powers up. Half the silent print failures I see are pre-OTA firmware on units that have been sitting in a Croma warehouse for a year. I now include a firmware update step in every onboarding checklist.

Total time on site: 65 minutes. Customer paid INR 1,000 (USD 12). The unit has been stable since. The customer has signed up for a quarterly health check at INR 600 per visit and refers me to neighbours. That call paid for itself five times over.

FAQs I get from actual customers

Will this work on the international variant of my HP unit?

Mostly. The companion app and the menu paths are stable across regions; what differs is the cartridge region-lock and a few feature toggles. For configuration like Wi-Fi Direct, AirPrint, and Web Connect, the path is identical. For cartridge-related issues, region lock matters - an India-region HP cartridge will throw a supply error on a US-region DeskJet even though the part number matches.

How often should I run preventive checks?

For SOHO units printing under 500 pages a month, every 3-4 months is fine. For shop counters doing 2,000+ pages, monthly: check the cartridge yield, the firmware revision, the waste-ink counter (on EcoTank/Smart Tank), and run a quality diagnostic page.

Will this void my warranty?

Standard configuration through the official companion app or panel menus does not void warranty. Factory reset does not void warranty. Updating firmware through the official HP portal does not void warranty. What voids warranty: using non-OEM cartridges that damage the printhead, opening the chassis, modifying firmware with non-official tools. Stay within official channels and you are safe.

What if my model is a slightly different revision?

Cross-check the model code on the rating plate at the back of the unit. Major firmware generations can shift menus by one or two levels. The DeskJet 2xxx versus 2xxx-e (HP+ enrolled) split is a particularly common point of confusion - the 'e' models behave differently around cartridge acceptance.

Can I roll back if something goes wrong?

Configuration rollback: yes for any setting changed through the companion app. Note the previous value before changing. Firmware rollback: NO on most HP consumer units - newer firmware writes version-locked bootloader entries that refuse older binaries. The Wi-Fi Direct and AirPrint configurations are simple toggles, easy to undo. Cartridge swaps - reverse the swap if you kept the old cartridge with usable ink.

Is the customer's data safe during this procedure?

For configuration changes - yes, no user data touched. For factory reset or HP+ enrolment changes - the scan history, Wi-Fi credentials, and any saved print jobs are wiped. Confirm with the customer in writing before triggering a reset on a SOHO unit.

Should I update firmware before or after this procedure?

Before. Always before. Firmware updates can shift menu paths and often include fixes that make the procedure go smoother. The exception: if the customer is mid-deadline and a firmware update is non-trivial (15-25 minutes including reboot), defer to after.

Does this work with HP Instant Ink?

Configuration procedures (Wi-Fi Direct, AirPrint, Web Connect) work whether or not Instant Ink is enrolled. Cartridge-related procedures change slightly on Instant Ink - the printer rejects non-Instant-Ink cartridges silently in HP+ mode. Always confirm enrolment status before troubleshooting cartridge errors.

Keeping the unit healthy so this is the last time

After the immediate fix, these habits keep the HP unit healthy and reduce repeat service calls.

• Schedule a quarterly health check. Print a configuration page, save it to the customer's folder, diff against the previous quarter. Drift shows up early this way.
• Subscribe to the HP firmware update notifications. Most brands have an opt-in email list; sign the customer's admin address up. For HP, enable Auto Update in HP Smart.
• Run a Print Quality Diagnostic Page monthly. Five minutes, 5 mL of ink, catches nozzle clogs before they show up on real print jobs.
• Document the HP account credentials in a password manager - Bitwarden Premium is INR 850/year (USD 10) per user. Customers lose printer HP account passwords more often than any other credential because the printer itself does not remind them.
• Photograph the rating plate at first contact. Model number, serial, manufacture date - all of which you will need for warranty claims and replacement part orders.
• Build an inventory spreadsheet: unit, location, IP, MAC, firmware revision, last-serviced date, HP account email. Saves hours when a customer calls in a panic.
• Educate the end user on what cartridge-low, "please reseat", and Wi-Fi Direct mean - many service calls are user error masquerading as hardware failures.
• Keep at least one spare OEM cartridge per active printer. The Saturday-evening "I am out of ink" emergency call is avoidable.

None of this is glamorous. All of it pays back in fewer Saturday-evening emergency calls and happier customers who renew the AMC year after year.

Closing the loop

The Buying Comparison (DeskJet 2700 vs PIXMA TS3522) flow on a HP unit is not complicated once you know the path and the gotchas. The first time takes 30-45 minutes because you are looking around the app or EWS for the right menu. By the third time it is under 10 minutes including the verification test.

If the procedure does not work after one careful pass, do not keep retrying in panic mode. Take a screenshot, take a panel photo, save the network-config page, capture HP Print and Scan Doctor output if applicable, and step back. Most failures are network or firmware related, and both are diagnosable from the artefacts you just captured. Repeating the same wrong steps faster does not fix anything.

I keep a small printed cheat-sheet in the toolkit with the panel-print shortcuts for every major brand, the companion-app login defaults, and the HP Print and Scan Doctor download URL. It lives next to the toner-vacuum and the spare network cable. Boring, but it has saved me twenty minutes of fumbling more times than I can count.

If you only remember three things from this guide: firmware first, network reach second, hardware third. That order, and that priority, fits 90 percent of consumer printer service calls.

Related fixes

Related guides worth a look while you sort this one out:

• Canon DeskJet 2700 not printing black after new cartridge: Fix
• Canon DeskJet 2700 series not printing black with full cartridge: Fix
• How to align print heads HP DeskJet on Canon
• How to scan multi-page PDF on HP DeskJet on Canon
• HP DeskJet 2700 not printing black after new cartridge: Fix
• HP DeskJet 2700 series not printing black with full cartridge: Fix