How to share on network on a Samsung Printer

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

What this guide covers

Share a USB-connected printer to other devices on your network.

Samsung printers (now serviced by HP after the 2017 acquisition) follow HP error code patterns on newer models. Service via HP India for warranty.

Step-by-step: how to share on network on a Samsung printer

1. Network the host computer first (printer should be added on it).
2. Windows: Settings → Bluetooth & devices → Printers → select printer → Printer Properties → Sharing → tick 'Share this printer' and give it a share name.
3. Mac: System Settings → General → Sharing → enable 'Printer Sharing' and tick the printer.
4. On the second computer: Add Printer → choose 'Network printer' → enter \\HOSTNAME\sharename (Windows) or pick from the Bonjour list (Mac).
5. Test print from the second computer.
6. Note: better long-term is a network printer (WiFi/Ethernet) — USB-shared printers require the host computer to be on.

Tools and materials you'll need

• Your Samsung printer + power
• Phone with the brand app installed (HP Smart, Canon PRINT, Epson Smart Panel, Brother iPrint&Scan) OR a computer
• For maintenance tasks: replacement consumables (toner, drum, printhead, etc.) if applicable
• For physical service: lint-free cloth + isopropyl alcohol for cleaning

Troubleshooting if the procedure fails

Frequently asked questions

Will this void my warranty?

Standard maintenance procedures (cleaning, alignment, cartridge replacement, configuration changes) do NOT void warranty. Internal hardware swaps without brand authorisation usually do.

How often should I repeat this procedure?

For maintenance tasks: once a month for heavy users, once every 3 months for light home use. For setup tasks: only when needed (new WiFi, new computer, etc).

What if my Samsung printer's menu looks different?

Samsung uses slightly different menu wording across model years. The structure is similar, look for the closest matching menu. If lost, the Samsung support site has model-specific articles for every model.

Can I do this from my phone?

Most setup, scanning, and basic maintenance tasks work from the brand app. Firmware updates and configuration changes work from both phone and computer; some advanced settings are computer-only.

Related guides

• See the full printer fix list for more Samsung guides
• For symptom-based issues, browse the Samsung guide list

Related fixes

Related guides worth a look while you sort this one out:

• How to share on network on a Brother Printer
• How to share on network on a Canon Printer
• How to share on network on a Epson Printer
• Samsung Printer ipv6 only network not connecting: How to Fix
• How to share on network on a HP Printer
• How to share on network on a Konica Minolta Printer

References

• Samsung support site (search your model + the task name)
• Brand app (in-app help is up to date for your specific model)

Reference material, not professional advice. When in doubt, call Samsung authorised service.

Common patterns we see

When this symptom shows up on this device, three patterns repeat:

1. Recent firmware update changed behavior: the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger, temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear. components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Safety + preconditions

Before any work on the device in front of you:

• Unplug from mains for any internal-access procedure.
• Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
• Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
• Avoid moisture; never apply liquids near vents or connectors.
• If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

How to confirm it's actually fixed

On this unit, the test is rarely "reboot and see". Use this list:

• Active reproduction: trigger the original failure path on purpose.
• Indirect reproduction: do an activity that would expose the same subsystem.
• Status indicator review: every LED / display / app status should be green.
• 24-hour soak: leave the device under normal load overnight; check the next morning.
• Telemetry check: review the device or app's diagnostic log for new error entries.

Escalation guide

For this hardware, the right escalation depends on impact:

• Cosmetic / minor: log a ticket via the How app or web portal. Response 1-3 business days.
• Mid-impact: phone support. Have your serial number ready.
• Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
• Out of warranty: third-party repair shop with manufacturer-certified technicians.

More frequently asked questions

How often should I run preventive checks?

Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.

Why is this happening on a brand-new unit?

Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.

What if my model isn't exactly the same revision?

Cross-check the model code on the rating plate against the manufacturer support page. Major firmware generations sometimes shift the menu path; the option is usually under a similarly-named section.

Will the procedure work on the international variant?

Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.

Are there safer alternatives for non-technical users?

Yes: the manufacturer's self-service troubleshooter (HP Smart, LG ThinQ, Samsung Members, similar) usually walks through the same steps in a guided UI. Use that first if you're not comfortable with menu paths.

Real share via network reality from the print-shop bench

I run a managed-print AMC out of HSR Layout in Bengaluru. Three Samsung ProXpress C2670FW colour MFDs, one Xpress M2885FW mono, and a Samsung MultiXpress X4250LX in a finance team room. When a client books me for share via network, I block sixty minutes, not the fifteen the manual promises. The reason is always the same: the Samsung firmware UI changed across the 2017 HP acquisition, so the menu path you find on YouTube usually doesn't match the printer you're standing in front of.

A ProXpress C2670FW lands at roughly INR 78,000 (USD 935) on a fresh-bought 2025 unit through the SP Road dealer network in Bengaluru. The Samsung SyncThru Web Service (the embedded admin web UI) is reached by typing the printer IP into Chrome. Default admin login on a fresh Samsung MFD is admin / sec00000. Change it before you do anything else; an unchanged default on a public LAN is a 2026 audit failure.

Topology deep dive for the share via network workflow

For share via network in a typical Indian SMB office, the Samsung MFD sits on a flat 192.168.1.0/24 LAN with an ACT Fibernet ONT or a Bharti Airtel Xstream box doing DHCP. The MFD pulls a lease, and unless you reserve it, the IP can shift on a power cut. I always carve a DHCP reservation pinned to the printer MAC (printed on the rear sticker, format 3C-2A-F4-xx-xx-xx). For share via network, the destination or the upstream service depends on the workflow: a cloud connector, a local share, an Android/iOS app, a Windows print queue.

If the office has Cisco Meraki MR45s or Aruba IAP-635 access points, I lock the printer to a wired port for the initial onboarding; wireless adds two failure modes (roaming and PSK rotation) that aren't worth saving an RJ45 cable. Cost of the cable run: INR 800-1,200 for fifteen metres of CAT6 including labour from a local cabler in BTM Layout.

Configuration walkthrough on SyncThru

Log into SyncThru Web Service (printer IP in browser, admin/sec00000). For share via network, the menu path sits under Settings → Machine Settings → Print/Scan on consumer ProXpress models and under Properties → General on MultiXpress enterprise SKUs. Three habits that save hours:

• Set NTP first under Network → TCP/IP → SNTP. Pick in.pool.ntp.org. Without correct time, anything cert-validated will fail.
• Set DNS to your ISP resolver plus 1.1.1.1 as backup. Jio Fiber resolvers in Mumbai drop intermittently after 11 PM and it's brutal for any cloud-based job.
• Test, then test from a cold reboot. Half the time a config seems to work until the box is power-cycled and the credential cache flushes.

The Samsung panel exposes about 60% of what SyncThru exposes. For share via network, advanced options often live in the web UI only. Always use a laptop and a browser when you can. The panel is for end-user operations, not setup.

Troubleshooting the share via network flow

The SyncThru job log under Information → Active Alerts + Information → Counters shows current state. For job failures, Settings → Print Settings → Log → Job Accounting exposes the full job log with error codes. Common patterns:

• Panel says "Network error" with no detail: check the actual DNS resolution. SyncThru → Tools → Network Tools → Ping. If you can't ping www.google.com, the printer is missing a gateway or DNS.
• "Authentication failed" on cloud connectors: the linked account's OAuth refresh token expired. Re-link the account from SyncThru.
• "Out of paper" but the tray is loaded: the tray sensor flag is stuck. Open and close the tray firmly; if it persists, the rear sensor needs cleaning with isopropyl alcohol.
• Print job stuck "processing" for over 30 seconds: the spooler queue is jammed. Restart the print spooler service on the client, or reboot the printer if the queue is server-side.

I once spent 25 minutes on an M2885FW at a Mysore architecture firm where the printer would print test pages from SyncThru but reject all jobs from Windows. The culprit was a corrupted print driver, not the printer. Uninstalling and reinstalling the V3 driver from HP's Samsung legacy support portal fixed it in another 10 minutes. Total client time billed: 90 minutes at INR 1,500.

India context: AMC, consumables, GST

OEM toner for the C2670FW runs INR 5,800 per cartridge (4 cartridges in a colour set: C, M, Y, K). On AMC, the per-page click rate sits at INR 0.55-0.75 for mono and INR 3.40-4.80 for colour through HP-authorised partners. If the client signed a 36-month contract through HP India, share via network configuration is usually included in the onboarding pack. If they bought the box outright from a re-seller on SP Road Bengaluru or Nehru Place Delhi, you're the support; bill INR 1,500 for a 60-90 minute configuration visit. That's market rate as of mid-2026.

GST treatment: under HSN 8443, MFDs attract 18% GST. Cartridge consumables also at 18%. Keep the invoice; if the customer is GST-registered, they reclaim input credit. AMC contracts get a separate service-tax line at 18% on labour. For DPDP Act 2023 audits, any cloud-connected printer that touches PII should have its data-region pinned to India where the service offers it (Microsoft Universal Print, Google Cloud, OneDrive all support India regions).

A real share via network deployment from last month

Mid-April 2026, a CA firm in Indiranagar Bengaluru asked for share via network across two Samsung ProXpress C2670FW units and one MultiXpress X4250LX. Their existing setup was a flat USB share from a single workstation. Two partners had retired their old laptops and the workflow was broken. I scoped the work over a Saturday morning when the office was empty. Total time on site: 2 hours 45 minutes. Steps were: SyncThru login on all three, NTP and DNS set, share via network configured per printer, a print test from each of three partner laptops, and 15 minutes of documentation for the office manager. Invoice: INR 4,200 inclusive of GST. Eight weeks in, no callbacks. That's the metric I care about.

More questions clients keep asking

Why does my Samsung MFD lose its share via network settings after a power cut?

It usually doesn't, the NVRAM survives loss-of-power fine. What dies is the time-sync; if the printer comes up before the router or before NTP is reachable, the clock skews and any cert-validated step fails silently. Fix: install a small UPS, an APC BX600C-IN at INR 3,200 carries the printer for 6-8 minutes which is enough for the router to recover.

Can I push this config to ten printers at once?

Yes, via SyncThru Admin (free) or the HP Web Jetadmin successor tool that picked up Samsung legacy support. Export the config from a known-good printer as an XML clone profile, then import to the fleet. I've done it on a batch of 14 ProXpress C2670FWs for a Hyderabad call-centre. Took 32 minutes including the test pass.

Is the panel-only setup equivalent to the web UI?

No. The panel exposes maybe 60% of what SyncThru exposes. For share via network, the panel works for basic cases; advanced options (multi-account, custom auth, certificate uploads) live in the web UI only. Always use a laptop when you can.

What happens if the printer firmware updates overnight?

Samsung auto-update is off by default on the enterprise SKUs. On consumer-leaning ProXpress models it might be on. After any firmware bump, re-test share via network. I have seen menu paths shift between major versions (e.g., V4.00 to V5.00 on the C2670FW shifted Wi-Fi settings under a new submenu).

How do I prove this is working for a compliance auditor?

SyncThru job log + a printed test job timestamp + the upstream system log (Microsoft Universal Print portal, Google Cloud Print successor, etc.). Three artefacts. For SEBI-regulated clients, I bundle them into a single PDF per quarter and email to the compliance officer. Takes 10 minutes per fleet.

Will share via network void my warranty?

No. Configuration changes through SyncThru and the panel are explicitly supported. The warranty void clauses are about opening the chassis, using non-OEM toner during the warranty period, or unauthorised firmware flashes. Standard configuration work doesn't touch any of those.