SonicWall SWS14-24 vs Check Point: How to Choose

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

Quick comparison

Compare SonicWall SWS14-24 against Check Point on price, ecosystem, support tier, and your existing team skill set.

Decision criteria

| Criterion | Why it matters |

|---|---|

| Existing skills | Your team's training is a sunk cost; switching vendors carries a re-training tax. |

| TCO over 5 years | Hardware + licenses + support + training + power. |

| Ecosystem fit | Controllers, cloud management, APIs: does it integrate with what you already run? |

| Support / RMA | Tier-1 vendors have predictable 24x7 TAC; smaller vendors vary by region. |

| Compliance | If your regulator names a specific vendor, comparison ends there. |

| Feature parity | Some vendor-specific features (SDN fabric, telemetry) don't have direct equivalents. |

When to stay with SonicWall

• Standardisation across enterprise.
• SonicWall Support + RMA matters for your SLAs.
• Existing investment in SonicWall management / fabric.

When to switch to Check Point

• SonicWall refresh quote is 2-3x the alternative for the same use case.
• Your team is already strong on the alternative vendor.
• The alternative's cloud-managed / SaaS architecture is the goal.

Frequently asked questions

Will this work on my specific SonicOS version?

The procedure reflects current SonicOS behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a SonicWall Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the SonicWall official documentation?

https://www.sonicwall.com/support/knowledge-base/. search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

Related guides

• All SonicWall fix guides → /sonicwall/
• All vendor guides → /vendors/

Related fixes

Related guides worth a look while you sort this one out:

• SonicWall SWS14-24FPOE vs Check Point: How to Choose
• SonicWall SWS14-48 vs Check Point: How to Choose
• SonicWall SWS12-10FPOE vs Check Point: How to Choose
• SonicWall SWS12-8POE vs Check Point: How to Choose
• SonicWall SWS14-24 all ports dead: Diagnose & Fix
• SonicWall SWS14-24: How to back up configs nightly to a Git repo

References

• SonicWall support portal: https://www.sonicwall.com/support
• SonicWall knowledge base: https://www.sonicwall.com/support/knowledge-base/
• SonicWall security advisories: https://psirt.global.sonicwall.com
• Open a case: https://www.mysonicwall.com

Reference material, not professional advice. Validate against your specific SonicOS version and test in a non-production environment before applying.

What changed recently?

Fault diagnosis on a SonicWall device goes faster when you map the symptom to a recent change:

• Did firmware update in the last 7 days?
• Did the network (router, ISP, VPN) change?
• Was the device moved physically?
• Did paired devices (phone, hub, app) update?
• Were any accessories swapped in or out?

The answer narrows the root cause to a manageable subset.

Before you start

A few things to confirm so the SonicWall device fix goes cleanly:

• Latest firmware downloaded if you're going to update.
• Warranty + support contract status checked, opening sealed parts may void it.
• Backup of current configuration (where applicable) taken.
• Spare parts on hand if you anticipate replacement.
• Adequate workspace, lighting, and time: rushing causes regressions.

Quick verification

Before you walk away from a SonicWall device fix, run through:

1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.

When to call SonicWall support instead

Escalate if:

• The same symptom returns within 24 hours of a clean fix.
• You see physical damage (burn marks, swollen battery, cracked PCB).
• The device is in warranty and a hardware replacement is the cheaper outcome.
• Repair requires specialised tools you don't own (alignment jigs, calibration software).
• Following the official path keeps the warranty intact, which matters more than the time spent.

More frequently asked questions

Is it safe to apply during business hours?

If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.

Can I roll this back if something breaks?

Yes for software-level changes (firmware rollback, config rollback). Hardware changes are usually one-way. Always back up settings before starting.

Why is this happening on a brand-new unit?

Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.

Should I update firmware first or last?

Update firmware first if a release note specifically mentions your symptom. Otherwise, finish the troubleshooting flow first, then update; that way you can isolate whether the update or the underlying fix solved it.

Are there safer alternatives for non-technical users?

Yes. the manufacturer's self-service troubleshooter (HP Smart, LG ThinQ, Samsung Members, similar) usually walks through the same steps in a guided UI. Use that first if you're not comfortable with menu paths.