Upgrade Failure

SonicWall TZ370: How to rollback to the previous image after a failed upgrade

Q: Where can I find the SonicWall official documentation?

https://www.sonicwall.com/support/knowledge-base/ — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	SonicWall
Operating system	SonicOS
Category	Upgrade Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need SonicWall Support + RMA.

Upgrade work on a SonicWall fleet is mostly about discipline. SonicOS gives you the commands; the failure mode is almost always operator error, wrong image for the platform, integrity not checked, no rollback plan. The TZ370 family is no exception.

I always do a one-box pilot before a fleet roll. system upload-firmware ftp://10.10.1.100/firmware.bin on a single representative unit, then 24 hours of soak, then the rest of the fleet in waves. Skipping the soak has bitten me twice.

SonicWall Support will want the exact build string and the upgrade method (CLI vs controller-driven) on every case, so keep that recorded for the change ticket.

What this guide covers

Rollback to the previous image after a failed upgrade on a SonicWall TZ370 (SonicOS).

Step-by-step

Confirm there's a previous image still on flash.
Set the boot variable to that previous image.
Reboot.
Verify the version is back to the prior release.
Investigate the upgrade failure separately: do not re-attempt without root cause.

CLI / commands

# Boot recovery prompt: Safe Mode

# Verify image
show version (CLI)

# Upgrade
system upload-firmware ftp://10.10.1.100/firmware.bin

# Save / commit
commit

# Rollback
system import-settings ftp://10.10.1.100/backup.exp

Recovery options

Boot loader recovery (Safe Mode)
Rollback to the previous image with system import-settings ftp://10.10.1.100/backup.exp
Force failover to a known-good standby (HA platforms)

Frequently asked questions

Will this work on my specific SonicOS version?

The procedure reflects current SonicOS behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a SonicWall Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the SonicWall official documentation?

https://www.sonicwall.com/support/knowledge-base/. search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All SonicWall fix guides → /sonicwall/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

SonicWall support portal: https://www.sonicwall.com/support
SonicWall knowledge base: https://www.sonicwall.com/support/knowledge-base/
SonicWall security advisories: https://psirt.global.sonicwall.com
Open a case: https://www.mysonicwall.com

Reference material, not professional advice. Validate against your specific SonicOS version and test in a non-production environment before applying.

Why this matters for your day-to-day

A SonicWall device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Before you start

A few things to confirm so the SonicWall device fix goes cleanly:

Latest firmware downloaded if you're going to update.
Warranty + support contract status checked, opening sealed parts may void it.
Backup of current configuration (where applicable) taken.
Spare parts on hand if you anticipate replacement.
Adequate workspace, lighting, and time: rushing causes regressions.

How to confirm it's actually fixed

On a SonicWall device, the test is rarely "reboot and see". Use this list:

Active reproduction: trigger the original failure path on purpose.
Indirect reproduction: do an activity that would expose the same subsystem.
Status indicator review: every LED / display / app status should be green.
24-hour soak: leave the device under normal load overnight; check the next morning.
Telemetry check: review the device or app's diagnostic log for new error entries.

When to call SonicWall support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.