Upgrade Failure

Sophos XGS 116: How to do an emergency image reload from the boot loader

Q: Where can I find the Sophos official documentation?

https://support.sophos.com/support/s/ — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Sophos
Operating system	SFOS (Sophos Firewall OS)
Category	Upgrade Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Sophos Support + RMA.

I have run more Sophos upgrades than I can count and the only ones that hurt are the ones where I skipped image-integrity verification. SFOS (Sophos Firewall OS) either ships a `verify` step or expects you to checksum the file before system firmware-upload type=usb.

On the XGS 87 platform the activation phase is where you lose data-plane connectivity. Plan the change window around that window, not the full upgrade duration.

If something goes wrong, the rollback path on SFOS (Sophos Firewall OS) is well-trodden. but only if you saved running-config before starting. Do that now, before anything else.

What this guide covers

Do an emergency image reload from the boot loader on a Sophos XGS 116 (SFOS (Sophos Firewall OS)).

Step-by-step

At the boot loader, configure IP, gateway, TFTP server.
Download the image.
Set the boot variable to the new image.
Reset to boot.

CLI / commands

# Boot recovery prompt: Recovery console (USB)

# Verify image
system version (CLI)

# Upgrade
system firmware-upload type=usb

# Save / commit
(auto-saves in Web UI; CLI changes persist)

# Rollback
system backup-restore restore

Recovery options

Boot loader recovery (Recovery console (USB))
Rollback to the previous image with system backup-restore restore
Force failover to a known-good standby (HA platforms)

Frequently asked questions

Will this work on my specific SFOS (Sophos Firewall OS) version?

The procedure reflects current SFOS (Sophos Firewall OS) behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a Sophos Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Sophos official documentation?

https://support.sophos.com/support/s/: search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Sophos fix guides → /sophos/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Sophos support portal: https://support.sophos.com
Sophos knowledge base: https://support.sophos.com/support/s/
Sophos security advisories: https://www.sophos.com/en-us/security-advisories
Open a case: https://secure2.sophos.com/en-us/support.aspx

Reference material, not professional advice. Validate against your specific SFOS (Sophos Firewall OS) version and test in a non-production environment before applying.

Why this matters for your day-to-day

A Sophos device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Safety + preconditions

Before any work on a Sophos device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Verification checklist

After applying the fix on your Sophos device, confirm:

The original symptom is no longer reproducible.
Related features (status LEDs, app sync, paired accessories) still work.
The device responds to a soft reboot without the fault returning.
Any error codes that were on display have cleared.
Documentation (your service log, the brand companion app) reflects the change.

Escalation guide

For a Sophos device, the right escalation depends on impact:

Cosmetic / minor: log a ticket via the Sophos app or web portal. Response 1-3 business days.
Mid-impact: phone support. Have your serial number ready.
Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
Out of warranty: third-party repair shop with manufacturer-certified technicians.