Hardware Failure

Sophos XGS 87 power supply failed: Diagnose & Fix

Q: Where can I find the Sophos official documentation?

https://support.sophos.com/support/s/ — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Sophos
Operating system	SFOS (Sophos Firewall OS)
Category	Hardware Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Sophos Support + RMA.

Hardware-class faults on Sophos kit fall into a tidy little matrix once you have seen a few. SFOS (Sophos Firewall OS) gives you the building blocks via `system version (CLI)` and `system diagnostics show device-info`; the rest is pattern matching. The XGS 87 platform is one of the more common offenders only because the install base is large.

Do not skip the visible-and-audible inspection. Burnt-PCB smell and fan-tray rattle are diagnostic signals that no command will ever surface. I have caught more dying PSUs by ear than by `system diagnostics show device-info`.

If the chassis is dark and the console is silent, jump straight to the PSU/cable substitution path before opening a Sophos Support ticket, it eliminates the most common cause in under five minutes.

What this guide covers

Diagnose and recover from power supply failed on a Sophos XGS 87.

Step-by-step

Confirm which PSU failed.
Verify the remaining PSU has enough capacity for the device + line cards + PoE budget.
Note the failed PSU's part number.
Replace during a maintenance window. most enterprise PSUs are hot-swappable.
After replacement, confirm both PSUs show OK.

CLI / commands

# Verify hardware state
system version (CLI)
system status
system diagnostics show device-info

# Collect for Sophos Support
system support-tools generate-debug-info

When to RMA

Repeated failure after re-seat and power-cycle
Visible burn, scorching, or physical damage
POST or memory diagnostic failure
Hardware crashinfo without a software workaround

Frequently asked questions

Will this work on my specific SFOS (Sophos Firewall OS) version?

The procedure reflects current SFOS (Sophos Firewall OS) behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a Sophos Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Sophos official documentation?

https://support.sophos.com/support/s/: search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Sophos fix guides → /sophos/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Sophos support portal: https://support.sophos.com
Sophos knowledge base: https://support.sophos.com/support/s/
Sophos security advisories: https://www.sophos.com/en-us/security-advisories
Open a case: https://secure2.sophos.com/en-us/support.aspx

Reference material, not professional advice. Validate against your specific SFOS (Sophos Firewall OS) version and test in a non-production environment before applying.

What changed recently?

Fault diagnosis on a Sophos device goes faster when you map the symptom to a recent change:

Did firmware update in the last 7 days?
Did the network (router, ISP, VPN) change?
Was the device moved physically?
Did paired devices (phone, hub, app) update?
Were any accessories swapped in or out?

The answer narrows the root cause to a manageable subset.

Before you start

A few things to confirm so the Sophos device fix goes cleanly:

Latest firmware downloaded if you're going to update.
Warranty + support contract status checked, opening sealed parts may void it.
Backup of current configuration (where applicable) taken.
Spare parts on hand if you anticipate replacement.
Adequate workspace, lighting, and time. rushing causes regressions.

Verification checklist

After applying the fix on your Sophos device, confirm:

The original symptom is no longer reproducible.
Related features (status LEDs, app sync, paired accessories) still work.
The device responds to a soft reboot without the fault returning.
Any error codes that were on display have cleared.
Documentation (your service log, the brand companion app) reflects the change.

Escalation guide

For a Sophos device, the right escalation depends on impact:

Cosmetic / minor: log a ticket via the Sophos app or web portal. Response 1-3 business days.
Mid-impact: phone support. Have your serial number ready.
Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
Out of warranty: third-party repair shop with manufacturer-certified technicians.