Sophos XGS 87: How to zero-touch provisioning

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

What this guide covers

How to zero-touch provisioning for Sophos XGS 87 (SFOS (Sophos Firewall OS)).

Step-by-step

1. Choose the automation surface: vendor controller, API, or CLI scripting.
2. Verify reachability + credentials from your automation host.
3. Test the change on a single device + maintenance window.
4. Roll out in waves of 10-20 devices to limit blast radius.
5. Pre-collect baseline, push the change, post-collect; diff.
6. Roll back any device whose post-check fails.

Sample CLI invocation

# Manual baseline
system version (CLI)
system status
system interface show

# Push change (via vendor CLI)
system configuration
system interface add name=Port1 ipv4-address=10.0.0.1 netmask=255.255.255.0 zone=LAN
(auto-saves in Web UI; CLI changes persist)

# Verify
system interface show

Best practices

• Always test on a single device or sandbox before fleet rollout.
• Keep configurations in version control (Git).
• Use AAA + RBAC for the automation account; never embed credentials in code.
• Build pre/post-change validation into your pipeline.

Frequently asked questions

Will this work on my specific SFOS (Sophos Firewall OS) version?

The procedure reflects current SFOS (Sophos Firewall OS) behaviour. Older releases may need minor syntax adjustments: use the CLI help (? or tab-completion) to verify.

Should I open a Sophos Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Sophos official documentation?

https://support.sophos.com/support/s/, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

Related guides

• All Sophos fix guides → /sophos/
• All vendor guides → /vendors/

Related fixes

Related guides worth a look while you sort this one out:

• Sophos XGS 107: How to zero-touch provisioning
• Sophos XGS 116: How to zero-touch provisioning
• Sophos XGS 87 all ports dead: Diagnose & Fix
• Sophos XGS 87: How to back up configs nightly to a Git repo
• Sophos XGS 87: How to deploy with a Python script (paramiko / netmiko / native API)
• Sophos XGS 87: How to deploy with Ansible

References

• Sophos support portal: https://support.sophos.com
• Sophos knowledge base: https://support.sophos.com/support/s/
• Sophos security advisories: https://www.sophos.com/en-us/security-advisories
• Open a case: https://secure2.sophos.com/en-us/support.aspx

Reference material, not professional advice. Validate against your specific SFOS (Sophos Firewall OS) version and test in a non-production environment before applying.

Common patterns we see

When this symptom shows up on a Sophos device, three patterns repeat:

1. Recent firmware update changed behavior. the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger, temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear: components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Safety + preconditions

Before any work on a Sophos device:

• Unplug from mains for any internal-access procedure.
• Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
• Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
• Avoid moisture; never apply liquids near vents or connectors.
• If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Quick verification

Before you walk away from a Sophos device fix, run through:

1. Reproduce the original trigger. does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.

When to call Sophos support instead

Escalate if:

• The same symptom returns within 24 hours of a clean fix.
• You see physical damage (burn marks, swollen battery, cracked PCB).
• The device is in warranty and a hardware replacement is the cheaper outcome.
• Repair requires specialised tools you don't own (alignment jigs, calibration software).
• Following the official path keeps the warranty intact, which matters more than the time spent.

More frequently asked questions

Will this void my warranty?

Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.

Does this affect other devices on my network?

Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.

Is it safe to apply during business hours?

If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.

How long does this fix usually take?

Most users complete the steps in 20-45 minutes the first time, and 5-10 minutes on subsequent runs once the menu paths are familiar.

Are there safer alternatives for non-technical users?

Yes, the manufacturer's self-service troubleshooter (HP Smart, LG ThinQ, Samsung Members, similar) usually walks through the same steps in a guided UI. Use that first if you're not comfortable with menu paths.