Hardware Failure

Zscaler ZIA (SWG/CASB/FWaaS) power supply failed: Diagnose & Fix

Q: Where can I find the Zscaler official documentation?

https://help.zscaler.com — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Zscaler
Operating system	Zscaler Cloud (ZIA / ZPA / ZDX)
Category	Hardware Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Zscaler Support + RMA.

When a Zscaler ZIA (SWG/CASB/FWaaS) starts misbehaving, the temptation is to reboot and hope. Resist it. Capture `Admin Portal → Activation` and `trust.zscaler.com cloud status` first; that 30-second buffer is the difference between a real root cause and another reload at 3am next week.

Zscaler Cloud (ZIA / ZPA / ZDX) has a habit of logging the actual failing component into the system log seconds before the LED transitions. Tail the log while you run the diagnostic commands. you will often see the answer scroll past in real time.

Below is the exact sequence I run on customer gear. Steps are ordered cheapest-first so you exit early if it really is just a loose cable.

What this guide covers

Diagnose and recover from power supply failed on a Zscaler ZIA (SWG/CASB/FWaaS).

Step-by-step

Confirm which PSU failed.
Verify the remaining PSU has enough capacity for the device + line cards + PoE budget.
Note the failed PSU's part number.
Replace during a maintenance window, most enterprise PSUs are hot-swappable.
After replacement, confirm both PSUs show OK.

CLI / commands

# Verify hardware state
Admin Portal → Activation
Admin Portal → Administration → Service Status
trust.zscaler.com cloud status

# Collect for Zscaler Support
Client Connector → Help → Export Logs

When to RMA

Repeated failure after re-seat and power-cycle
Visible burn, scorching, or physical damage
POST or memory diagnostic failure
Hardware crashinfo without a software workaround

Frequently asked questions

Will this work on my specific Zscaler Cloud (ZIA / ZPA / ZDX) version?

The procedure reflects current Zscaler Cloud (ZIA / ZPA / ZDX) behaviour. Older releases may need minor syntax adjustments: use the CLI help (? or tab-completion) to verify.

Should I open a Zscaler Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Zscaler official documentation?

https://help.zscaler.com, search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Zscaler fix guides → /zscaler/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Zscaler support portal: https://help.zscaler.com
Zscaler knowledge base: https://help.zscaler.com
Zscaler security advisories: https://trust.zscaler.com
Open a case: https://help.zscaler.com/submit-ticket

Reference material, not professional advice. Validate against your specific Zscaler Cloud (ZIA / ZPA / ZDX) version and test in a non-production environment before applying.

Why this matters for your day-to-day

A Zscaler device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.

Safety + preconditions

Before any work on a Zscaler device:

Unplug from mains for any internal-access procedure.
Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
Use ESD-safe handling for boards and modules. no carpet, no wool sleeves.
Avoid moisture; never apply liquids near vents or connectors.
If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.

Verification checklist

After applying the fix on your Zscaler device, confirm:

The original symptom is no longer reproducible.
Related features (status LEDs, app sync, paired accessories) still work.
The device responds to a soft reboot without the fault returning.
Any error codes that were on display have cleared.
Documentation (your service log, the brand companion app) reflects the change.

When to call Zscaler support instead

Escalate if:

The same symptom returns within 24 hours of a clean fix.
You see physical damage (burn marks, swollen battery, cracked PCB).
The device is in warranty and a hardware replacement is the cheaper outcome.
Repair requires specialised tools you don't own (alignment jigs, calibration software).
Following the official path keeps the warranty intact, which matters more than the time spent.