ZTE: asymmetric routing breaking firewall
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Vendor | ZTE |
|---|---|
| Operating system | ZXR10 / ZXROS |
| Category | Routing Issues |
| Skill level | Intermediate to advanced |
| DIY-able? | Yes with CLI access; some scenarios need ZTE Customer Support + RMA. |
What this guide covers
Diagnose and fix asymmetric routing breaking firewall on a ZTE device (ZXR10 / ZXROS).
Most likely cause + fix
Stateful firewall sees only one direction. Fix with PBR or collapse to a single egress.
Diagnostic CLI
show interface brief
# Use the ZXR10 / ZXROS equivalents of:
# show ip route / show route
# show ip bgp summary / show bgp summary
# show ip ospf neighbor / show ospf neighbor
# show log | include BGP|OSPF
When the issue persists
- Capture show tech-support and open a ZTE Customer Support case.
- Cross-reference https://support.zte.com.cn for known issues in your release.
Frequently asked questions
Will this work on my specific ZXR10 / ZXROS version?
The procedure reflects current ZXR10 / ZXROS behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.
Should I open a ZTE Customer Support case immediately?
Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.
Where can I find the ZTE official documentation?
https://support.zte.com.cn: search the product family + feature name.
Is this procedure safe in production?
Test in a lab or maintenance window first. Capture pre-change state so you can roll back.
Related guides
Related fixes
Related guides worth a look while you sort this one out:
- ZTE firewall: asymmetric routing detected
- ZTE router: asymmetric routing detected
- ZTE switch: asymmetric routing detected
- Best ZTE firewall for branch office
- Best ZTE firewall for enterprise data centre
- Best ZTE firewall for retail store
References
- ZTE support portal: https://support.zte.com.cn
- ZTE knowledge base: https://support.zte.com.cn
- ZTE security advisories: https://support.zte.com.cn/support/news/AnnoucementOverviewLatest.aspx
- Open a case: https://support.zte.com.cn
Reference material, not professional advice. Validate against your specific ZXR10 / ZXROS version and test in a non-production environment before applying.
Why this matters for your day-to-day
A ZTE: device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.
Before you start
A few things to confirm so the ZTE: device fix goes cleanly:
- Latest firmware downloaded if you're going to update.
- Warranty + support contract status checked, opening sealed parts may void it.
- Backup of current configuration (where applicable) taken.
- Spare parts on hand if you anticipate replacement.
- Adequate workspace, lighting, and time. rushing causes regressions.
Verification checklist
After applying the fix on your ZTE: device, confirm:
- The original symptom is no longer reproducible.
- Related features (status LEDs, app sync, paired accessories) still work.
- The device responds to a soft reboot without the fault returning.
- Any error codes that were on display have cleared.
- Documentation (your service log, the brand companion app) reflects the change.
Escalation guide
For a ZTE: device, the right escalation depends on impact:
- Cosmetic / minor: log a ticket via the ZTE: app or web portal. Response 1-3 business days.
- Mid-impact: phone support. Have your serial number ready.
- Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
- Out of warranty: third-party repair shop with manufacturer-certified technicians.
More frequently asked questions
Why is this happening on a brand-new unit?
Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.
Should I update firmware first or last?
Update firmware first if a release note specifically mentions your symptom. Otherwise, finish the troubleshooting flow first, then update; that way you can isolate whether the update or the underlying fix solved it.
What if the fix returns after a reboot?
Persistent fault returns mean either: a hardware fault (escalate), a configuration that's being overwritten by a sync source (check cloud profiles), or a regression in a recent firmware update (rollback).
Can I roll this back if something breaks?
Yes for software-level changes (firmware rollback, config rollback). Hardware changes are usually one-way. Always back up settings before starting.
Are there safer alternatives for non-technical users?
Yes, the manufacturer's self-service troubleshooter (HP Smart, LG ThinQ, Samsung Members, similar) usually walks through the same steps in a guided UI. Use that first if you're not comfortable with menu paths.