ZTE router: MAC table full
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Vendor | ZTE |
|---|---|
| Operating system | ZXR10 / ZXROS |
| Category | IP / Network Issue |
| Skill level | Intermediate to advanced |
| DIY-able? | Yes with CLI access; some scenarios need ZTE Customer Support + RMA. |
What this guide covers
Fix MAC table full on a ZTE router.
Step-by-step
- Check current MAC table utilisation.
- Identify the offending VLAN or port.
- Enable storm-control on access ports.
- Enable port-security with a hard MAC limit.
- Long-term, refresh to a switch with a larger MAC table.
CLI / commands
show interface brief
show interface gei_1/1/1
show device
When the issue persists
- Open a ZTE Customer Support case with the tech-support bundle.
- Provide the timeline + recent changes.
Frequently asked questions
Will this work on my specific ZXR10 / ZXROS version?
The procedure reflects current ZXR10 / ZXROS behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.
Should I open a ZTE Customer Support case immediately?
Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.
Where can I find the ZTE official documentation?
https://support.zte.com.cn. search the product family + feature name.
Is this procedure safe in production?
Test in a lab or maintenance window first. Capture pre-change state so you can roll back.
Related guides
Related fixes
Related guides worth a look while you sort this one out:
- ZTE firewall: MAC table full
- ZTE switch: MAC table full
- ZTE router: MAC address flapping between ports
- Best ZTE router for branch office
- Best ZTE router for enterprise data centre
- Best ZTE router for retail store
References
- ZTE support portal: https://support.zte.com.cn
- ZTE knowledge base: https://support.zte.com.cn
- ZTE security advisories: https://support.zte.com.cn/support/news/AnnoucementOverviewLatest.aspx
- Open a case: https://support.zte.com.cn
Reference material, not professional advice. Validate against your specific ZXR10 / ZXROS version and test in a non-production environment before applying.
What changed recently?
Fault diagnosis on a ZTE device goes faster when you map the symptom to a recent change:
- Did firmware update in the last 7 days?
- Did the network (router, ISP, VPN) change?
- Was the device moved physically?
- Did paired devices (phone, hub, app) update?
- Were any accessories swapped in or out?
The answer narrows the root cause to a manageable subset.
Before you start
A few things to confirm so the ZTE device fix goes cleanly:
- Latest firmware downloaded if you're going to update.
- Warranty + support contract status checked, opening sealed parts may void it.
- Backup of current configuration (where applicable) taken.
- Spare parts on hand if you anticipate replacement.
- Adequate workspace, lighting, and time: rushing causes regressions.
Verification checklist
After applying the fix on your ZTE device, confirm:
- The original symptom is no longer reproducible.
- Related features (status LEDs, app sync, paired accessories) still work.
- The device responds to a soft reboot without the fault returning.
- Any error codes that were on display have cleared.
- Documentation (your service log, the brand companion app) reflects the change.
When to call ZTE support instead
Escalate if:
- The same symptom returns within 24 hours of a clean fix.
- You see physical damage (burn marks, swollen battery, cracked PCB).
- The device is in warranty and a hardware replacement is the cheaper outcome.
- Repair requires specialised tools you don't own (alignment jigs, calibration software).
- Following the official path keeps the warranty intact, which matters more than the time spent.
More frequently asked questions
What if my model isn't exactly the same revision?
Cross-check the model code on the rating plate against the manufacturer support page. Major firmware generations sometimes shift the menu path; the option is usually under a similarly-named section.
Is it safe to apply during business hours?
If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.
How often should I run preventive checks?
Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.
Will this void my warranty?
Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.
Will the procedure work on the international variant?
Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.