ZTE ZXR10 5960 stack member missing: Diagnose & Fix
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Vendor | ZTE |
|---|---|
| Operating system | ZXR10 / ZXROS |
| Category | Hardware Failure |
| Skill level | Intermediate to advanced |
| DIY-able? | Yes with CLI access; some scenarios need ZTE Customer Support + RMA. |
When a ZTE ZXR10 5950 starts misbehaving, the temptation is to reboot and hope. Resist it. Capture `show version` and `show environment` first; that 30-second buffer is the difference between a real root cause and another reload at 3am next week.
ZXR10 / ZXROS has a habit of logging the actual failing component into the system log seconds before the LED transitions. Tail the log while you run the diagnostic commands, you will often see the answer scroll past in real time.
Below is the exact sequence I run on customer gear. Steps are ordered cheapest-first so you exit early if it really is just a loose cable.
What this guide covers
Diagnose and recover from stack member missing on a ZTE ZXR10 5960.
Step-by-step
- Run the stack / chassis status command to see member states.
- Inspect the stack cables: re-seat both ends.
- Try replacing one stack cable at a time to identify a bad cable.
- Power-cycle the affected member if cables are good.
- If the member still doesn't rejoin, RMA it.
CLI / commands
# Verify hardware state
show version
show device
show environment
# Collect for ZTE Customer Support
show tech-support
When to RMA
- Repeated failure after re-seat and power-cycle
- Visible burn, scorching, or physical damage
- POST or memory diagnostic failure
- Hardware crashinfo without a software workaround
Frequently asked questions
Will this work on my specific ZXR10 / ZXROS version?
The procedure reflects current ZXR10 / ZXROS behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.
Should I open a ZTE Customer Support case immediately?
Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.
Where can I find the ZTE official documentation?
https://support.zte.com.cn. search the product family + feature name.
Is this procedure safe in production?
Test in a lab or maintenance window first. Capture pre-change state so you can roll back.
Related guides
Related fixes
Related guides worth a look while you sort this one out:
- ZTE ZXR10 5950 stack member missing: Diagnose & Fix
- ZTE ZXR10 8900E stack member missing: Diagnose & Fix
- ZTE ZXR10 9900X stack member missing: Diagnose & Fix
- ZTE ZXR10 M6000 stack member missing: Diagnose & Fix
- ZTE ZXR10 T8000 stack member missing: Diagnose & Fix
- ZTE ZXR10 W821 stack member missing: Diagnose & Fix
References
- ZTE support portal: https://support.zte.com.cn
- ZTE knowledge base: https://support.zte.com.cn
- ZTE security advisories: https://support.zte.com.cn/support/news/AnnoucementOverviewLatest.aspx
- Open a case: https://support.zte.com.cn
Reference material, not professional advice. Validate against your specific ZXR10 / ZXROS version and test in a non-production environment before applying.
What changed recently?
Fault diagnosis on a ZTE device goes faster when you map the symptom to a recent change:
- Did firmware update in the last 7 days?
- Did the network (router, ISP, VPN) change?
- Was the device moved physically?
- Did paired devices (phone, hub, app) update?
- Were any accessories swapped in or out?
The answer narrows the root cause to a manageable subset.
Before you start
A few things to confirm so the ZTE device fix goes cleanly:
- Latest firmware downloaded if you're going to update.
- Warranty + support contract status checked, opening sealed parts may void it.
- Backup of current configuration (where applicable) taken.
- Spare parts on hand if you anticipate replacement.
- Adequate workspace, lighting, and time: rushing causes regressions.
Quick verification
Before you walk away from a ZTE device fix, run through:
1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.
Escalation guide
For a ZTE device, the right escalation depends on impact:
- Cosmetic / minor: log a ticket via the ZTE app or web portal. Response 1-3 business days.
- Mid-impact: phone support. Have your serial number ready.
- Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
- Out of warranty: third-party repair shop with manufacturer-certified technicians.
More frequently asked questions
Does this affect other devices on my network?
Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.
What if the fix returns after a reboot?
Persistent fault returns mean either: a hardware fault (escalate), a configuration that's being overwritten by a sync source (check cloud profiles), or a regression in a recent firmware update (rollback).
Can I roll this back if something breaks?
Yes for software-level changes (firmware rollback, config rollback). Hardware changes are usually one-way. Always back up settings before starting.
Why is this happening on a brand-new unit?
Out-of-box defects do occur. If you've owned the device under 30 days and the symptom persists after a factory reset, escalate to the seller for replacement under DOA terms before opening a manufacturer support case.
What if my model isn't exactly the same revision?
Cross-check the model code on the rating plate against the manufacturer support page. Major firmware generations sometimes shift the menu path; the option is usually under a similarly-named section.