How to migrate ADFS to Entra ID with migration tool on Entra MFA
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Brand | Entra MFA |
|---|---|
| Family | Entra Identity |
| Category | Microsoft |
| Guide type | How To |
| Skill level | Intermediate |
Why this matters
Migrate adfs to entra id with migration tool on a Entra MFA device is one of the highest-volume how-to searches for the Entra Identity category. Most users find the menu path inconsistent across Entra MFA model revisions, so this guide gives a generalised path plus model-specific notes.
Pre-requisites
- A Entra MFA device that's powered on and on the latest stable service version / OS.
- The Entra MFA companion app or management tool installed and signed in.
- 5-15 minutes uninterrupted.
Step-by-step
- Locate the setting. Open settings on your Entra MFA device. For "migrate ADFS to Entra ID with migration tool", the option lives under one of: General, Advanced, Connectivity, Accessibility, or a Entra MFA-specific menu. Check the Entra MFA user manual for your exact model if you can't find it.
- Toggle the feature on. Confirm the on-screen prompt.
- Configure sub-options. Most features have 2-3 sub-options (mode, schedule, paired device). Pick values that match your real-world usage pattern.
- Save / apply. Some Entra MFA models auto-save, others require an explicit Done / Save tap.
- Test live. Trigger the feature in a real scenario to confirm the configuration is correct.
Tips that save time
- Pair this feature with a Entra MFA automation / routine if the device supports it.
- If the feature relies on cloud sync, give it 1-2 minutes after enabling to propagate.
- For multi-user households / multi-admin teams, set per-user profiles so each user sees their preferred state.
Common gotchas
- Feature greyed out, usually service version too old. Update + retry.
- Feature works once then stops. battery saver / power saver mode is killing the Entra MFA app process. Whitelist it.
- Feature works but with delay, usually cloud-sync latency; check internet speed and Entra MFA service status.
Region / variant notes
Some Entra MFA features are region-locked or only available on higher-tier SKUs. If your variant doesn't show "migrate ADFS to Entra ID with migration tool" at all, check the Entra MFA model spec sheet to confirm support.
Frequently asked questions
How long should the recovery / setup take?
For most Entra MFA Entra Identity cases, allow 15-45 minutes the first time. Repeats are usually under 10 minutes once you know the menu path.
Will this exact procedure work on every Entra MFA model?
The procedure reflects current Entra MFA behaviour. Menu paths shift between service version generations; verify against the manual for your specific model + revision.
Is the procedure safe in production / live use?
Apply during a maintenance window where possible. Capture pre-change state. Entra MFA doesn't usually publish rollback procedures, so make sure you can restore manually.
Does this affect my Entra MFA support coverage?
Standard operation per the user manual + applying official service version updates does NOT void support coverage. Opening managed services, third-party repair, or unauthorised modifications can void support coverage: check before going further.
Related guides
- All Entra Identity guides → /microsoft/section/entra_identity.html
- All Microsoft guides → /microsoft/
Related fixes
Related guides worth a look while you sort this one out:
- How to migrate ADFS to Entra ID with migration tool on Access Reviews
- How to migrate ADFS to Entra ID with migration tool on Conditional Access
- How to migrate ADFS to Entra ID with migration tool on Entitlement Management
- How to migrate ADFS to Entra ID with migration tool on Entra B2B / B2C
- How to migrate ADFS to Entra ID with migration tool on Entra Connect / Cloud Syn
- How to migrate ADFS to Entra ID with migration tool on Entra ID (Azure AD)
References
- Entra MFA official support portal for your model.
- Entra MFA community forum + Reddit threads.
- Vendor PSIRT / advisory page (where applicable).
Reference material, not professional advice. Validate with your vendor manual and follow local regulations.
Why this matters for your day-to-day
this unit that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.
Before you start
A few things to confirm so the affected device fix goes cleanly:
- Latest service version downloaded if you're going to update.
- support coverage + support contract status checked, opening managed parts may void it.
- Backup of current configuration (where applicable) taken.
- Spare parts on hand if you anticipate replacement.
- Adequate workspace, lighting, and time. rushing causes regressions.
Quick verification
Before you walk away from this unit fix, run through:
1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + service version version.
Escalation guide
For the affected device, the right escalation depends on impact:
- Cosmetic / minor: log a ticket via the How app or web portal. Response 1-3 business days.
- Mid-impact: phone support. Have your serial number ready.
- Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
- Out of support coverage: third-party repair shop with manufacturer-certified technicians.
More frequently asked questions
Will the procedure work on the international variant?
Some features and service version paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.
How often should I run preventive checks?
Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.
Will this void my support coverage?
Applying official service version updates and following the user manual will not affect support coverage. Opening managed services, jumping safety circuits, or using third-party parts can void support coverage in most jurisdictions.
What if my model isn't exactly the same revision?
Cross-check the model code on the rating plate against the manufacturer support page. Major service version generations sometimes shift the menu path; the option is usually under a similarly-named section.
Is it safe to apply during business hours?
If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.
Field notes from real Entra Identity incidents
When I work on migrate ADFS to Entra ID with migration tool on Entra MFA the rhythm I lean on is the one I have built over years of these tickets. Sign-in logs are the single highest-signal Entra surface: every failure has a specific status code and the doc page for that code is one search away. The Microsoft Graph PowerShell SDK is the path forward for Entra automation; the legacy AzureAD module is on a timer. Conditional Access What-If is the only safe way to test a policy change; deploying first and watching the support queue light up is the dangerous way.
Tools I actually reach for
For migrate ADFS to Entra ID with migration tool on Entra MFA on Entra MFA the cheapest signal I can land usually comes from AzureAD module (legacy, deprecation pending), then Audit logs, Sign-in logs, Entra admin center, Microsoft Graph PowerShell SDK when AzureAD module (legacy, deprecation pending) cannot see the layer the fault sits in, and Entra ID Diagnostics & Logs for the cases where neither of those answers cleanly. That ordering is not academic. It matches the layers the failure tends to surface through, so the cheap signal lands first and the heavier tooling only comes out when the simpler answer does not hold up under scrutiny.
Verification I run before I close the ticket
Before I mark migrate ADFS to Entra ID with migration tool on Entra MFA resolved on a Entra MFA unit, the verification loop below is what I actually run. Each step proves a different layer is green, and the order matters - the cheap checks gate the more expensive ones.
Get-MgAuditLogSignIn -Top 25 -Filter "createdDateTime gt 2026-05-01T00:00:00Z"If that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.
Get-MgConditionalAccessPolicy | Select-Object DisplayName,StateIf that one comes back clean, move to the next check. If it does not, stop and dig in there before layering more verification on top of a red signal.
Connect-MgGraph -Scopes 'AuditLog.Read.All','Directory.Read.All'Only when every line above runs clean do I close the ticket and update the runbook with the timestamps.
Where I check first when the docs disagree
When two sources contradict each other on a Entra Identity detail, the disambiguation order I lean on is stable. I usually start at learn.microsoft.com/entra for the ground-truth view on Entra Identity. I usually start at azure.microsoft.com/updates for the ground-truth view on Entra Identity. I usually start at techcommunity.microsoft.com/category/azure-active-directory for the ground-truth view on Entra Identity. Random blog posts and reseller wikis are signal, not ground truth, and I treat them as such until the references above either confirm or contradict the claim.
Pitfalls I have walked into on this exact path
The shortcuts that look smart on migrate ADFS to Entra ID with migration tool on Entra MFA have a habit of biting back. The pitfalls below are the ones I have personally walked into on a Entra MFA unit, not things I read about. Sign-in logs are the single highest-signal Entra surface, every failure has a specific status code and the doc page for that code is one search away. Conditional Access What-If is the only safe way to test a policy change; deploying first and watching the support queue light up is the dangerous way. When in doubt I revert to the slower path that the manual prescribes - the time I save by skipping it is always smaller than the time I spend cleaning up afterwards.
What I tell the next on-call
When I hand migrate ADFS to Entra ID with migration tool on Entra MFA off to the next person on rotation, the three lines I leave in the runbook are these. First, the symptom signature for Entra MFA on the Entra Identity family - not a paraphrase, the exact string that surfaces. Second, the diagnostic that gave the highest signal in the least time. Third, the exact verification command whose green output justified closing the ticket. That trio is what turns a one-off fix into a runbook entry the next engineer can use without paging me at three in the morning.
I also add a one-line note on the cost of getting this wrong. For migrate ADFS to Entra ID with migration tool on Entra MFA on a Entra MFA unit, the cost is rarely the replacement part. It is the downtime, the second site visit, and the trust deficit you spend with whoever owns the asset when the fix does not hold. That framing keeps the next on-call from choosing the cheap-looking shortcut that ends up costing the most in elapsed hours and goodwill.