ZTE ZXR10 5950 power supply failed: Diagnose & Fix
By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30
| Vendor | ZTE |
|---|---|
| Operating system | ZXR10 / ZXROS |
| Category | Hardware Failure |
| Skill level | Intermediate to advanced |
| DIY-able? | Yes with CLI access; some scenarios need ZTE Customer Support + RMA. |
When a ZTE ZXR10 5950 starts misbehaving, the temptation is to reboot and hope. Resist it. Capture `show version` and `show environment` first; that 30-second buffer is the difference between a real root cause and another reload at 3am next week.
ZXR10 / ZXROS has a habit of logging the actual failing component into the system log seconds before the LED transitions. Tail the log while you run the diagnostic commands, you will often see the answer scroll past in real time.
Below is the exact sequence I run on customer gear. Steps are ordered cheapest-first so you exit early if it really is just a loose cable.
What this guide covers
Diagnose and recover from power supply failed on a ZTE ZXR10 5950.
Step-by-step
- Confirm which PSU failed.
- Verify the remaining PSU has enough capacity for the device + line cards + PoE budget.
- Note the failed PSU's part number.
- Replace during a maintenance window: most enterprise PSUs are hot-swappable.
- After replacement, confirm both PSUs show OK.
CLI / commands
# Verify hardware state
show version
show device
show environment
# Collect for ZTE Customer Support
show tech-support
When to RMA
- Repeated failure after re-seat and power-cycle
- Visible burn, scorching, or physical damage
- POST or memory diagnostic failure
- Hardware crashinfo without a software workaround
Frequently asked questions
Will this work on my specific ZXR10 / ZXROS version?
The procedure reflects current ZXR10 / ZXROS behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.
Should I open a ZTE Customer Support case immediately?
Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.
Where can I find the ZTE official documentation?
https://support.zte.com.cn. search the product family + feature name.
Is this procedure safe in production?
Test in a lab or maintenance window first. Capture pre-change state so you can roll back.
Related guides
Related fixes
Related guides worth a look while you sort this one out:
- ZTE ZXR10 5960 power supply failed: Diagnose & Fix
- ZTE ZXR10 8900E power supply failed: Diagnose & Fix
- ZTE ZXR10 9900X power supply failed: Diagnose & Fix
- ZTE ZXR10 M6000 power supply failed: Diagnose & Fix
- ZTE ZXR10 T8000 power supply failed: Diagnose & Fix
- ZTE ZXR10 W821 power supply failed: Diagnose & Fix
References
- ZTE support portal: https://support.zte.com.cn
- ZTE knowledge base: https://support.zte.com.cn
- ZTE security advisories: https://support.zte.com.cn/support/news/AnnoucementOverviewLatest.aspx
- Open a case: https://support.zte.com.cn
Reference material, not professional advice. Validate against your specific ZXR10 / ZXROS version and test in a non-production environment before applying.
Why this matters for your day-to-day
A ZTE device that's misbehaving costs more than the fix itself: lost productivity, missed calls, security risk, even safety risk in some categories. Treating the symptom quickly with a documented procedure is cheaper than letting it persist. The steps above are written to get you back to working in under an hour where possible, and to flag clearly when escalation is the right call.
Safety + preconditions
Before any work on a ZTE device:
- Unplug from mains for any internal-access procedure.
- Discharge stored energy (capacitors in PSUs, residual battery charge) per manufacturer guidance.
- Use ESD-safe handling for boards and modules, no carpet, no wool sleeves.
- Avoid moisture; never apply liquids near vents or connectors.
- If you smell smoke, see scorch marks, or feel uneven heat, stop and escalate.
Quick verification
Before you walk away from a ZTE device fix, run through:
1. Reproduce the original trigger: does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.
When to call ZTE support instead
Escalate if:
- The same symptom returns within 24 hours of a clean fix.
- You see physical damage (burn marks, swollen battery, cracked PCB).
- The device is in warranty and a hardware replacement is the cheaper outcome.
- Repair requires specialised tools you don't own (alignment jigs, calibration software).
- Following the official path keeps the warranty intact, which matters more than the time spent.
More frequently asked questions
Will the procedure work on the international variant?
Some features and firmware paths are region-locked. Check the model spec sheet to confirm your variant supports the menu option referenced. If you're outside the US/EU, look for the regional support portal.
How often should I run preventive checks?
Quarterly for most consumer devices; monthly for production / commercial devices. Set a calendar reminder so the device stays healthy between issues.
Will this void my warranty?
Applying official firmware updates and following the user manual will not affect warranty. Opening sealed components, jumping safety circuits, or using third-party parts can void warranty in most jurisdictions.
Does this affect other devices on my network?
Generally no. The procedure is local to this device. Network-side changes (firmware updates that affect TLS, SMB, or routing) are flagged explicitly in the steps.
Is it safe to apply during business hours?
If the device is in production use, apply during a scheduled maintenance window. Most procedures need 2-15 minutes of downtime. Capture pre-change state so you can roll back if needed.