Hardware Failure

ZTE ZXR10 M6000 power supply failed: Diagnose & Fix

Q: Where can I find the ZTE official documentation?

https://support.zte.com.cn — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	ZTE
Operating system	ZXR10 / ZXROS
Category	Hardware Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need ZTE Customer Support + RMA.

Hardware-class faults on ZTE kit fall into a tidy little matrix once you have seen a few. ZXR10 / ZXROS gives you the building blocks via `show version` and `show environment`; the rest is pattern matching. The ZXR10 5950 platform is one of the more common offenders only because the install base is large.

Do not skip the visible-and-audible inspection. Burnt-PCB smell and fan-tray rattle are diagnostic signals that no command will ever surface. I have caught more dying PSUs by ear than by `show environment`.

If the chassis is dark and the console is silent, jump straight to the PSU/cable substitution path before opening a ZTE Customer Support ticket, it eliminates the most common cause in under five minutes.

What this guide covers

Diagnose and recover from power supply failed on a ZTE ZXR10 M6000.

Step-by-step

Confirm which PSU failed.
Verify the remaining PSU has enough capacity for the device + line cards + PoE budget.
Note the failed PSU's part number.
Replace during a maintenance window: most enterprise PSUs are hot-swappable.
After replacement, confirm both PSUs show OK.

CLI / commands

# Verify hardware state
show version
show device
show environment

# Collect for ZTE Customer Support
show tech-support

When to RMA

Repeated failure after re-seat and power-cycle
Visible burn, scorching, or physical damage
POST or memory diagnostic failure
Hardware crashinfo without a software workaround

Frequently asked questions

Will this work on my specific ZXR10 / ZXROS version?

The procedure reflects current ZXR10 / ZXROS behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a ZTE Customer Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the ZTE official documentation?

https://support.zte.com.cn. search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All ZTE fix guides → /zte/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

ZTE support portal: https://support.zte.com.cn
ZTE knowledge base: https://support.zte.com.cn
ZTE security advisories: https://support.zte.com.cn/support/news/AnnoucementOverviewLatest.aspx
Open a case: https://support.zte.com.cn

Reference material, not professional advice. Validate against your specific ZXR10 / ZXROS version and test in a non-production environment before applying.

Common patterns we see

When this symptom shows up on a ZTE device, three patterns repeat:

1. Recent firmware update changed behavior, the symptom started within a week of an OTA push. Rollback or wait for the hotfix. 2. Environmental trigger: temperature, humidity, line voltage, network changes. Look at what changed in the environment. 3. Cumulative wear, components like batteries, gaskets, fans degrade over time. Replace the consumable rather than chasing a software fix.

Knowing which pattern applies saves time on the wrong fix.

Before you start

A few things to confirm so the ZTE device fix goes cleanly:

Latest firmware downloaded if you're going to update.
Warranty + support contract status checked. opening sealed parts may void it.
Backup of current configuration (where applicable) taken.
Spare parts on hand if you anticipate replacement.
Adequate workspace, lighting, and time, rushing causes regressions.

Verification checklist

After applying the fix on your ZTE device, confirm:

The original symptom is no longer reproducible.
Related features (status LEDs, app sync, paired accessories) still work.
The device responds to a soft reboot without the fault returning.
Any error codes that were on display have cleared.
Documentation (your service log, the brand companion app) reflects the change.

Escalation guide

For a ZTE device, the right escalation depends on impact:

Cosmetic / minor: log a ticket via the ZTE app or web portal. Response 1-3 business days.
Mid-impact: phone support. Have your serial number ready.
Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
Out of warranty: third-party repair shop with manufacturer-certified technicians.