Hardware Failure

Sophos AP6 420E stack member missing: Diagnose & Fix

Q: Where can I find the Sophos official documentation?

https://support.sophos.com/support/s/ — search the product family + feature name.

By Sai Kiran Pandrala · reviewed by Sai Kiran Pandrala, Editor Last verified: 2026-05-30

⚡ At a glance

Vendor	Sophos
Operating system	SFOS (Sophos Firewall OS)
Category	Hardware Failure
Skill level	Intermediate to advanced
DIY-able?	Yes with CLI access; some scenarios need Sophos Support + RMA.

Hardware-class faults on Sophos kit fall into a tidy little matrix once you have seen a few. SFOS (Sophos Firewall OS) gives you the building blocks via `system version (CLI)` and `system diagnostics show device-info`; the rest is pattern matching. The AP6 420 platform is one of the more common offenders only because the install base is large.

Do not skip the visible-and-audible inspection. Burnt-PCB smell and fan-tray rattle are diagnostic signals that no command will ever surface. I have caught more dying PSUs by ear than by `system diagnostics show device-info`.

If the chassis is dark and the console is silent, jump straight to the PSU/cable substitution path before opening a Sophos Support ticket, it eliminates the most common cause in under five minutes.

What this guide covers

Diagnose and recover from stack member missing on a Sophos AP6 420E.

Step-by-step

Run the stack / chassis status command to see member states.
Inspect the stack cables. re-seat both ends.
Try replacing one stack cable at a time to identify a bad cable.
Power-cycle the affected member if cables are good.
If the member still doesn't rejoin, RMA it.

CLI / commands

# Verify hardware state
system version (CLI)
system status
system diagnostics show device-info

# Collect for Sophos Support
system support-tools generate-debug-info

When to RMA

Repeated failure after re-seat and power-cycle
Visible burn, scorching, or physical damage
POST or memory diagnostic failure
Hardware crashinfo without a software workaround

Frequently asked questions

Will this work on my specific SFOS (Sophos Firewall OS) version?

The procedure reflects current SFOS (Sophos Firewall OS) behaviour. Older releases may need minor syntax adjustments, use the CLI help (? or tab-completion) to verify.

Should I open a Sophos Support case immediately?

Open one if you suspect hardware failure or the symptom persists after a maintenance-window reload. Make sure your support entitlement is active first.

Where can I find the Sophos official documentation?

https://support.sophos.com/support/s/: search the product family + feature name.

Is this procedure safe in production?

Test in a lab or maintenance window first. Capture pre-change state so you can roll back.

All Sophos fix guides → /sophos/
All vendor guides → /vendors/

Related guides worth a look while you sort this one out:

References

Sophos support portal: https://support.sophos.com
Sophos knowledge base: https://support.sophos.com/support/s/
Sophos security advisories: https://www.sophos.com/en-us/security-advisories
Open a case: https://secure2.sophos.com/en-us/support.aspx

Reference material, not professional advice. Validate against your specific SFOS (Sophos Firewall OS) version and test in a non-production environment before applying.

What changed recently?

Fault diagnosis on a Sophos device goes faster when you map the symptom to a recent change:

Did firmware update in the last 7 days?
Did the network (router, ISP, VPN) change?
Was the device moved physically?
Did paired devices (phone, hub, app) update?
Were any accessories swapped in or out?

The answer narrows the root cause to a manageable subset.

Before you start

A few things to confirm so the Sophos device fix goes cleanly:

Latest firmware downloaded if you're going to update.
Warranty + support contract status checked, opening sealed parts may void it.
Backup of current configuration (where applicable) taken.
Spare parts on hand if you anticipate replacement.
Adequate workspace, lighting, and time. rushing causes regressions.

Quick verification

Before you walk away from a Sophos device fix, run through:

1. Reproduce the original trigger, does the issue reappear? 2. Check the device's status / health screen for any new alerts. 3. Confirm paired devices (app, hub, controller) reconnected. 4. Save / commit any configuration changes per the device's normal workflow. 5. Note the change in your maintenance log with date + firmware version.

Escalation guide

For a Sophos device, the right escalation depends on impact:

Cosmetic / minor: log a ticket via the Sophos app or web portal. Response 1-3 business days.
Mid-impact: phone support. Have your serial number ready.
Critical (production down, safety issue): in-person dealer / TAC visit. Bring proof of purchase.
Out of warranty: third-party repair shop with manufacturer-certified technicians.